Fabricating the rear and there's no set plan 🤔
Today we're continuing on with the rear design and fabrication. We don't really have the design plan set in stone so we're just going to fabricate on the fly and see what we come up with.
The inspiration for this build is the 1930's Diamond T Texaco Doodlebug Tanker Truck.
The Texaco Doodlebug (also called the Diamond T Doodlebug) was a futuristic American tanker truck of the 1930s. The vehicles were streamlined and highly aerodynamic. The overall shape, a flattened half-cylinder rounded at the front and tapered at the end, has been described as a "pill" or "breadloaf". The passenger cabin was blended into the body, and there were no fenders, hood, cowl, or running boards. The windshield was compound curved glass, quite advanced for the time. It stood only 6 feet (1.8 m) tall, very short for a tanker truck then or since.
IF YOU ENJOYED WATCHING:
subscribe, leave a comment and hit the like button
https://www.youtube.com/c/badchad
CHECK OUT OUR MERCHANDISE HERE:
https://www.hiltzautoco.com
FOLLOW US ON SOCIAL MEDIA:
https://www.facebook.com/badchadcustoms
https://www.instagram.com/badchadcustoms
https://www.facebook.com/macintyrejn
https://www.instagram.com/___jolene
MAILING ADDRESS:
Hiltz Auto Co.
RR3
Canning, NS
B0P 1H0
#badchad #fabrication #doodlebug #diamondt #texaco #trucks #truck #hotrod #hotrods #cars #classiccars #badchadcustoms #rustrepair #car #carshow #hotrod #hotrodsandmusclecars #trucks #automobilerepairshops #rust #rustrepair #wheels #antiquecars #customtrucks #customcars
Видео Fabricating the rear and there's no set plan 🤔 канала Bad Chad
The inspiration for this build is the 1930's Diamond T Texaco Doodlebug Tanker Truck.
The Texaco Doodlebug (also called the Diamond T Doodlebug) was a futuristic American tanker truck of the 1930s. The vehicles were streamlined and highly aerodynamic. The overall shape, a flattened half-cylinder rounded at the front and tapered at the end, has been described as a "pill" or "breadloaf". The passenger cabin was blended into the body, and there were no fenders, hood, cowl, or running boards. The windshield was compound curved glass, quite advanced for the time. It stood only 6 feet (1.8 m) tall, very short for a tanker truck then or since.
IF YOU ENJOYED WATCHING:
subscribe, leave a comment and hit the like button
https://www.youtube.com/c/badchad
CHECK OUT OUR MERCHANDISE HERE:
https://www.hiltzautoco.com
FOLLOW US ON SOCIAL MEDIA:
https://www.facebook.com/badchadcustoms
https://www.instagram.com/badchadcustoms
https://www.facebook.com/macintyrejn
https://www.instagram.com/___jolene
MAILING ADDRESS:
Hiltz Auto Co.
RR3
Canning, NS
B0P 1H0
#badchad #fabrication #doodlebug #diamondt #texaco #trucks #truck #hotrod #hotrods #cars #classiccars #badchadcustoms #rustrepair #car #carshow #hotrod #hotrodsandmusclecars #trucks #automobilerepairshops #rust #rustrepair #wheels #antiquecars #customtrucks #customcars
Видео Fabricating the rear and there's no set plan 🤔 канала Bad Chad
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
This design change was inspired by a fan 👏🏼It's been decided... the fin is being extended 😵Sheathing in the engine bay door 👏🏻Now we need to fabricate the engine bay doorFabricating the fin was harder than expected 😆Sitting down to drink beers and talk cars with Jim and Nate 🍺The final touches on the 1956 Plymouth ✨We made a mistake... now we need to fix it 😬Assembling the front endRepairing the rusty rad support... NOT restoring it (there is a difference)Fitting the hand-made dash… will it fit? 😱Let's try this again... will the body fit the chassis? 🙏🏼Just found a 1938 Chevy on the side of the road 🤯Ran into an issue with the rear panel 😱❌Change of plans… redesigning the rear of the truck 💥Firing up the Bugatti engine.... cross your fingers!!! 😝🙏🏼Sheathing in the roof with JoleneFabricating a "prototype" roof panel for testing 🚨More controversial fabrication... panoramic windows ⚠️Come meet us!!! #badchad #syracusenationals #cars