More controversial fabrication... panoramic windows ⚠️
There seems to be a lot of concern that the engine will be in the middle of the truck and that we'll be sitting in the front. We aren't reinventing the wheel here... we are duplicating the same concept of the original 1930's Diamond T Texaco Doodlebug Tanker Truck. Today we are going to design, engineer, and fabricate the panoramic windows. There will be six total, just like the original. This will really create a good visual 😍
The inspiration for this build is the 1930's Diamond T Texaco Doodlebug Tanker Truck.
The Texaco Doodlebug (also called the Diamond T Doodlebug) was a futuristic American tanker truck of the 1930s. The vehicles were streamlined and highly aerodynamic. The overall shape, a flattened half-cylinder rounded at the front and tapered at the end, has been described as a "pill" or "breadloaf". The passenger cabin was blended into the body, and there were no fenders, hood, cowl, or running boards. The windshield was compound curved glass, quite advanced for the time. It stood only 6 feet (1.8 m) tall, very short for a tanker truck then or since.
IF YOU ENJOYED WATCHING:
subscribe, leave a comment and hit the like button
https://www.youtube.com/c/badchad
CHECK OUT OUR MERCHANDISE HERE:
https://www.hiltzautoco.com
FOLLOW US ON SOCIAL MEDIA:
https://www.facebook.com/badchadcustoms
https://www.instagram.com/badchadcustoms
https://www.facebook.com/macintyrejn
https://www.instagram.com/___jolene
MAILING ADDRESS:
Hiltz Auto Co.
RR3
Canning, NS
B0P 1H0
#badchad #fabrication #doodlebug #diamondt #texaco #trucks #truck #hotrod #hotrods #cars #classiccars #badchadcustoms #rustrepair #car #carshow #hotrod #hotrodsandmusclecars #trucks #automobilerepairshops #rust #rustrepair #wheels #antiquecars #customtrucks #customcars
Видео More controversial fabrication... panoramic windows ⚠️ канала Bad Chad
The inspiration for this build is the 1930's Diamond T Texaco Doodlebug Tanker Truck.
The Texaco Doodlebug (also called the Diamond T Doodlebug) was a futuristic American tanker truck of the 1930s. The vehicles were streamlined and highly aerodynamic. The overall shape, a flattened half-cylinder rounded at the front and tapered at the end, has been described as a "pill" or "breadloaf". The passenger cabin was blended into the body, and there were no fenders, hood, cowl, or running boards. The windshield was compound curved glass, quite advanced for the time. It stood only 6 feet (1.8 m) tall, very short for a tanker truck then or since.
IF YOU ENJOYED WATCHING:
subscribe, leave a comment and hit the like button
https://www.youtube.com/c/badchad
CHECK OUT OUR MERCHANDISE HERE:
https://www.hiltzautoco.com
FOLLOW US ON SOCIAL MEDIA:
https://www.facebook.com/badchadcustoms
https://www.instagram.com/badchadcustoms
https://www.facebook.com/macintyrejn
https://www.instagram.com/___jolene
MAILING ADDRESS:
Hiltz Auto Co.
RR3
Canning, NS
B0P 1H0
#badchad #fabrication #doodlebug #diamondt #texaco #trucks #truck #hotrod #hotrods #cars #classiccars #badchadcustoms #rustrepair #car #carshow #hotrod #hotrodsandmusclecars #trucks #automobilerepairshops #rust #rustrepair #wheels #antiquecars #customtrucks #customcars
Видео More controversial fabrication... panoramic windows ⚠️ канала Bad Chad
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Tailgate fabrication from scratch for the 1935 Plymouth custom truckCreating the perfect door gap using this simple trick ✅ 1935 PlymouthFabricating the floor skeleton for inside the truck boxFabricating a box from scratch for custom pickup truck ➜ stake pocket fabBack to work on the custom 1935 Plymouth truckWe have to widen the rear fenders to fit the box sidesThe next hurdle is to add structural integrity to the roofSPOT PRIMING THE LOUVERED HOOD, SPATS, AND ALL REPAIRED AREASWe need to cut a hole in the body 🫣This was insane 🤯 Race track lap with Paul Morris + private tour!Pre-1968 vintage hotrod drag racing with serious horsepower engines 🇦🇺🏁Fabricating the box for the 1935 Plymouth pickup truck 🚨 (part 1)The last step of the box sides...applying the stake pockets ✅Spraying high build primer on the body ✅These are the top 5 cars we choose at the "Get Chopped" car show 🏆🇦🇺Sheathing in the roof before we start fabricating the box 😎Final video of the roof chop: fitting the door topsBad Chad's 1st day in Australia 🇦🇺I can't believe a fan sent this to us 🤯 #unboxing fan mailUsing 3" exhaust pipe to fabricate running boards on 1935 Plymouth truckHood fabrication — sheathing with sheet metal 🚨 1928 Ford