How to Put Up a Roller Banner Stand Assembly Video Tutorial | instantprint
instantprint’s range of roller banners are the perfect tool for promoting your products. Advertise a key message with standard, premium or wide pull up banner printing.
As well as being an effective marketing tool, they’re also easy to set up! Here are our step-by-step instructions on how to set up a roller banner stand.
Assembly Instructions
1. Every retractable banner you order with us comes with a free carry case. First things first, remove your banner from the case.
2. The feet on the metal casing are there to help your retractable banner stand up strong and sturdy. Turn them around (as pictured below) and place the banner on the floor.
3. Now, take the pole out of the case and extend it to full length.
4. With the banner graphic (your design) facing away from you, place your foot on one of the metal feet.
5. Pull up the retractable banner to chest height.
6. Fit the pole connector into the bar at the top of the retractable banner.
7. Using the pole, finish extending the retractable banner to full height.
8. Once your banner reaches full height, secure the other end of the pole into the metal case at the base of the retractable banner. When you’re putting your retractable banner up, be careful not to release it until it’s fully retracted – otherwise, your banner could get damaged.
Disassembly Instructions
1. Hold the top of the banner with one hand.
2. Place your foot on one of the metal feet on the metal case to keep it stable.
3. With your other hand, remove the bottom end of the pole from the metal case – but make sure you keep the top of the pole connected to the banner.
4. Gently, let the banner retract back into its case until it’s at chest height
5. Keeping your hand on the top of the banner, remove the pole from the top and gently lower it into the case.
6. Turn the feet back in and place your retractable banner and pole back into the travel case.
Full how to and downloadable PDF on our blog:
https://www.instantprint.co.uk/printspiration/marketing-with-print/how-to-set-up-a-roller-banner
You can find the full range of instantprint pop up banners here:
https://www.instantprint.co.uk/banners
The model used in this tutorial is the standard 800mm x 2000mm. You can find it here:
https://www.instantprint.co.uk/largeformat/rollerbanners
_
Website : www.instantprint.co.uk
Facebook: https://www.facebook.com/instantprintuk/
YouTube: https://www.youtube.com/channel/UCxD2VHILomKfZKixIGW24gg
Twitter: https://twitter.com/instantprintuk?lang=en
Pinterest: https://www.pinterest.co.uk/instantprint/
LinkedIn: https://www.linkedin.com/company/instantprint-co-uk
Instagram: https://www.instagram.com/instantprintuk/?hl=en
Видео How to Put Up a Roller Banner Stand Assembly Video Tutorial | instantprint канала instantprint.
As well as being an effective marketing tool, they’re also easy to set up! Here are our step-by-step instructions on how to set up a roller banner stand.
Assembly Instructions
1. Every retractable banner you order with us comes with a free carry case. First things first, remove your banner from the case.
2. The feet on the metal casing are there to help your retractable banner stand up strong and sturdy. Turn them around (as pictured below) and place the banner on the floor.
3. Now, take the pole out of the case and extend it to full length.
4. With the banner graphic (your design) facing away from you, place your foot on one of the metal feet.
5. Pull up the retractable banner to chest height.
6. Fit the pole connector into the bar at the top of the retractable banner.
7. Using the pole, finish extending the retractable banner to full height.
8. Once your banner reaches full height, secure the other end of the pole into the metal case at the base of the retractable banner. When you’re putting your retractable banner up, be careful not to release it until it’s fully retracted – otherwise, your banner could get damaged.
Disassembly Instructions
1. Hold the top of the banner with one hand.
2. Place your foot on one of the metal feet on the metal case to keep it stable.
3. With your other hand, remove the bottom end of the pole from the metal case – but make sure you keep the top of the pole connected to the banner.
4. Gently, let the banner retract back into its case until it’s at chest height
5. Keeping your hand on the top of the banner, remove the pole from the top and gently lower it into the case.
6. Turn the feet back in and place your retractable banner and pole back into the travel case.
Full how to and downloadable PDF on our blog:
https://www.instantprint.co.uk/printspiration/marketing-with-print/how-to-set-up-a-roller-banner
You can find the full range of instantprint pop up banners here:
https://www.instantprint.co.uk/banners
The model used in this tutorial is the standard 800mm x 2000mm. You can find it here:
https://www.instantprint.co.uk/largeformat/rollerbanners
_
Website : www.instantprint.co.uk
Facebook: https://www.facebook.com/instantprintuk/
YouTube: https://www.youtube.com/channel/UCxD2VHILomKfZKixIGW24gg
Twitter: https://twitter.com/instantprintuk?lang=en
Pinterest: https://www.pinterest.co.uk/instantprint/
LinkedIn: https://www.linkedin.com/company/instantprint-co-uk
Instagram: https://www.instagram.com/instantprintuk/?hl=en
Видео How to Put Up a Roller Banner Stand Assembly Video Tutorial | instantprint канала instantprint.
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
The Building of the UK’s First Landa S10P, Inside the Factory | instantprintThe Science Behind the Perfect Business Card, Biometrics Testing | instantprintHow They're Made: Stapled Booklets | instantprintinstantprint smash a world record for the world's biggest business cardMeet Britain's Most Inspirational Small Business OwnerFolded Leaflet Guide, Folded Flyer Fold Types Explained | instantprintExplore Your Print FactoryMeet James, Founder of Be Presentable: Augmented Reality and Interactive Print | instantprintinstantprint: Print for Every FloristGreetings Card and Invitation Printing: New Creative Stocks | instantprintinstantprint's NEW Design Online ToolHow to Set Up Design for Print, Print-Ready Artwork | instantprintinstantprint produce the world's biggest business cardHow to Assemble an A-Frame Display Board and Replace the Posters | instantprintInstantprint: Behind the Scenes of Print for Every Businessinstantprint Factory Tour, Print Technology UK in 4K HDHow to Make Print Ready Files in Photoshop CC | instantprintHow to Set Up Your Design for Spot UV Printing | instantprintThe instantprint StoryHow to Add Bleed in Photoshop: Setting Up Bleed Area for Printing | instantprintHow Will Technology Change the Future of Business Cards?