How to Build a Simple Crosscut Sled | Essential Woodworking Shop Jig

Want to support the channel? Here's what you can do:
- Subscribe to the channel
- Hit that Like button
- Leave a comment
- Amazon Affiliate: https://amzn.to/2LaN1Ib

How to Build a Simple Crosscut Sled - I needed a crosscut sled for some upcoming projects so in this video I build a simple, no frills crosscut sled for my table saw. The base is 1/2 inch plywood and the fence rails are two strips of 3/4 plywood laminated together. I used a cheap poly cutting board to make the runners. The advantage here is that there is no concern with expansion and contraction with moisture in the air like you would have to account for if you were using wood. I used the 5 cut method to align the fence to within 6 thousandths...which is close enough for me! If you have any questions please comment below or contact me via the socials.

William Ng - 5 cut method instructional video: https://youtu.be/UbG-n--LFgQ

SawStop 1.75hp PCS: https://amzn.to/2X4gWsP
Bench Dog Push Blocks: https://amzn.to/2YB00uL
Ridge Carbide 10-inch Saw blade: https://amzn.to/3bATmcp
Bosch 18v Impact Driver: https://amzn.to/3cxAhJk
Ridgid ROS: https://amzn.to/364yHMA
Titebond Wood Glue: https://amzn.to/2LzTdv4
Bessy Parallel Clamps: https://amzn.to/2z4LHG3
Bessy 6-inch F-style Clamps: https://amzn.to/3e3LGl4

Subscribe: https://www.youtube.com/danprudlow?sub_confirmation=1

Twitter: http://twitter.com/DanPrudlow

Видео How to Build a Simple Crosscut Sled | Essential Woodworking Shop Jig канала Dan Prudlow