Making A Knurling Tool For The Lathe
G'day everyone,
Fore the last project of the year I thought I might as well get around to doing a project that has been on my list for quite some time. And that is to make a new knurling tool. My old one is a bump style (or push type) knurler and whilst they are great for larger lathes, they do require quite a lot of force to use, and according to the machining zeitgeist, that is very bad for the spindle bearings.
The new style that I will make is a clamp style. It will use a screw to clamp the two pattern wheels on to the workpiece, which should save the spindle bearings. This seems to be quite similar to a scissor type knurl tool and I have no idea if there is an advantage to one type. All I know is the clamp style works and it works well. I hope you enjoy the video
Lathe - Hafco Al250g
Mill - Sieg x2.7l
#machining #diy #lathe
Timestamps
0:00 - Intro
2:17 - Making The Main Body
5:36 - Making The Roller Arms
12:25 - Making A M8 x 1.25 Left Hand Tap
18:54 - Making The Leadscrew
21:26 - Making The Roller Pins
23:38 - Making The Backplate
25:05 - Final Assembly and Testing
Видео Making A Knurling Tool For The Lathe канала Artisan Makes
Fore the last project of the year I thought I might as well get around to doing a project that has been on my list for quite some time. And that is to make a new knurling tool. My old one is a bump style (or push type) knurler and whilst they are great for larger lathes, they do require quite a lot of force to use, and according to the machining zeitgeist, that is very bad for the spindle bearings.
The new style that I will make is a clamp style. It will use a screw to clamp the two pattern wheels on to the workpiece, which should save the spindle bearings. This seems to be quite similar to a scissor type knurl tool and I have no idea if there is an advantage to one type. All I know is the clamp style works and it works well. I hope you enjoy the video
Lathe - Hafco Al250g
Mill - Sieg x2.7l
#machining #diy #lathe
Timestamps
0:00 - Intro
2:17 - Making The Main Body
5:36 - Making The Roller Arms
12:25 - Making A M8 x 1.25 Left Hand Tap
18:54 - Making The Leadscrew
21:26 - Making The Roller Pins
23:38 - Making The Backplate
25:05 - Final Assembly and Testing
Видео Making A Knurling Tool For The Lathe канала Artisan Makes
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![Making Spline Shafts For a GEARBOX (Internal Splines too)](https://i.ytimg.com/vi/PY7N-kliLiI/default.jpg)
![Making Square Holes With A Square Broach](https://i.ytimg.com/vi/okMK6uvf3yY/default.jpg)
![Making a BIG Set of V Blocks for the Milling Machine | Vise Jaws](https://i.ytimg.com/vi/AAGSsUpYdLo/default.jpg)
![Making A fly Press | Part 4 - Pressing Bearings And Bending Metal](https://i.ytimg.com/vi/nNqQShX7BlQ/default.jpg)
![How I Made My Other Face Mill](https://i.ytimg.com/vi/3fW8dqFamv0/default.jpg)
![Fixing An Overdue Mistake - Morse Taper Slitting Saw Arbor Build](https://i.ytimg.com/vi/S56pgaH_qZQ/default.jpg)
![Making A Power Feed For The Milling Machine | Cheaper And Better](https://i.ytimg.com/vi/gtFClhNDGTU/default.jpg)
![Simple Machinist Hammer Build](https://i.ytimg.com/vi/R1dpmfmW1x0/default.jpg)
![The $600 Mini Lathe - 4 Years later](https://i.ytimg.com/vi/UdwiEx8psrw/default.jpg)
![Making A Broach To Cut Keyways](https://i.ytimg.com/vi/_sgCxpE9PQo/default.jpg)
![CNC Dividing Head Cutting Gears - M1 Z57](https://i.ytimg.com/vi/6VI8Li83hl8/default.jpg)
![Lathe | New Mods, Maintenance & Teardown](https://i.ytimg.com/vi/rEzZFpkMMgU/default.jpg)
![Making A fly Press | Part 3 - Ram block, Gibs and Leadscrew](https://i.ytimg.com/vi/Bz8xCRlEDKU/default.jpg)
![Making A Small Hand Plane](https://i.ytimg.com/vi/V1Y9yw9j_qI/default.jpg)
![A Tour Of My Workshop / Home Machine Shop (100k Subscriber Special)](https://i.ytimg.com/vi/bHnfvtYHn7k/default.jpg)
![What Is Wrong With The Lathe Now?](https://i.ytimg.com/vi/rTiu9Oi85Tc/default.jpg)
![Nickel Electroplating Steel In The Home Workshop](https://i.ytimg.com/vi/dXOffXX2A34/default.jpg)
![Milling Machine Workbench Cabinets Build](https://i.ytimg.com/vi/U4xXcHXofeA/default.jpg)
![Installing A DRO on my New Lathe (Digital Readout)](https://i.ytimg.com/vi/Y3C06jAEH1M/default.jpg)
![Making a Fly Cutter From 4140 Chromoly](https://i.ytimg.com/vi/wGgJN1PupXk/default.jpg)
![Making A TAP Follower - Should Have Made It a long Time Ago](https://i.ytimg.com/vi/XBov53ntj2Q/default.jpg)