Making A Power Feed For The Milling Machine | Cheaper And Better
G'day everyone,
It has been in the works for a while, but I can finally show you my power feed for the milling machine. I have wanted a power table feed for quite some time and I would have bought an off the shelf model, save for the fact that the Sieg brand one is very overpriced. I don't mind paying for the equipment that I use, but the sieg brand one really doesn't justify the price, considering what you get.
And it is for that reason why I decided to build a power table feed myself. The whole build centers around a geared DC motor with a worm gearbox. What I will do in this video is construct a rigid mount for the motor and a clutch mechanism to engage and disengage the power feed. Originally my plan was to use a design similar to Phil Vandelay, but I wanted to make the moving portion of the mechanism smaller, relying on only moving a clutch sleeve, rather than the whole motor assembly.
I hope you enjoy the video.
Mill Power Table
Mill Power Feed
#machining #diy #powerfeed
Timestamps
0:00 - Intro
2:19 - Making The Drive Pin For The Leadscrew
2:56 - Machining the End and Cover Plate
5:50 - How To Mount The Motor And Gearbox
7:33 - Making The Clutch Mechanism
13:33 - Making The Selector Forks For The Clutch Sleeve
19:27 - First Test
20:08 - Making A Cover and Adding Limit Switches
23:26 - Final Test
Видео Making A Power Feed For The Milling Machine | Cheaper And Better канала Artisan Makes
It has been in the works for a while, but I can finally show you my power feed for the milling machine. I have wanted a power table feed for quite some time and I would have bought an off the shelf model, save for the fact that the Sieg brand one is very overpriced. I don't mind paying for the equipment that I use, but the sieg brand one really doesn't justify the price, considering what you get.
And it is for that reason why I decided to build a power table feed myself. The whole build centers around a geared DC motor with a worm gearbox. What I will do in this video is construct a rigid mount for the motor and a clutch mechanism to engage and disengage the power feed. Originally my plan was to use a design similar to Phil Vandelay, but I wanted to make the moving portion of the mechanism smaller, relying on only moving a clutch sleeve, rather than the whole motor assembly.
I hope you enjoy the video.
Mill Power Table
Mill Power Feed
#machining #diy #powerfeed
Timestamps
0:00 - Intro
2:19 - Making The Drive Pin For The Leadscrew
2:56 - Machining the End and Cover Plate
5:50 - How To Mount The Motor And Gearbox
7:33 - Making The Clutch Mechanism
13:33 - Making The Selector Forks For The Clutch Sleeve
19:27 - First Test
20:08 - Making A Cover and Adding Limit Switches
23:26 - Final Test
Видео Making A Power Feed For The Milling Machine | Cheaper And Better канала Artisan Makes
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![Making Spline Shafts For a GEARBOX (Internal Splines too)](https://i.ytimg.com/vi/PY7N-kliLiI/default.jpg)
![Making Square Holes With A Square Broach](https://i.ytimg.com/vi/okMK6uvf3yY/default.jpg)
![Making a BIG Set of V Blocks for the Milling Machine | Vise Jaws](https://i.ytimg.com/vi/AAGSsUpYdLo/default.jpg)
![Making A fly Press | Part 4 - Pressing Bearings And Bending Metal](https://i.ytimg.com/vi/nNqQShX7BlQ/default.jpg)
![How I Made My Other Face Mill](https://i.ytimg.com/vi/3fW8dqFamv0/default.jpg)
![Fixing An Overdue Mistake - Morse Taper Slitting Saw Arbor Build](https://i.ytimg.com/vi/S56pgaH_qZQ/default.jpg)
![Simple Machinist Hammer Build](https://i.ytimg.com/vi/R1dpmfmW1x0/default.jpg)
![The $600 Mini Lathe - 4 Years later](https://i.ytimg.com/vi/UdwiEx8psrw/default.jpg)
![Making A Broach To Cut Keyways](https://i.ytimg.com/vi/_sgCxpE9PQo/default.jpg)
![CNC Dividing Head Cutting Gears - M1 Z57](https://i.ytimg.com/vi/6VI8Li83hl8/default.jpg)
![Lathe | New Mods, Maintenance & Teardown](https://i.ytimg.com/vi/rEzZFpkMMgU/default.jpg)
![Making A fly Press | Part 3 - Ram block, Gibs and Leadscrew](https://i.ytimg.com/vi/Bz8xCRlEDKU/default.jpg)
![Making A Small Hand Plane](https://i.ytimg.com/vi/V1Y9yw9j_qI/default.jpg)
![A Tour Of My Workshop / Home Machine Shop (100k Subscriber Special)](https://i.ytimg.com/vi/bHnfvtYHn7k/default.jpg)
![What Is Wrong With The Lathe Now?](https://i.ytimg.com/vi/rTiu9Oi85Tc/default.jpg)
![Nickel Electroplating Steel In The Home Workshop](https://i.ytimg.com/vi/dXOffXX2A34/default.jpg)
![Milling Machine Workbench Cabinets Build](https://i.ytimg.com/vi/U4xXcHXofeA/default.jpg)
![Installing A DRO on my New Lathe (Digital Readout)](https://i.ytimg.com/vi/Y3C06jAEH1M/default.jpg)
![Making a Fly Cutter From 4140 Chromoly](https://i.ytimg.com/vi/wGgJN1PupXk/default.jpg)
![Making A TAP Follower - Should Have Made It a long Time Ago](https://i.ytimg.com/vi/XBov53ntj2Q/default.jpg)