3 in 1 CNC / 3d Printer Problems / Port Detection / Thermal Runaway / Extruder Motor / Step Skipping

This video is all about the problem I faced during the building of my 3 in1 CNC machine and in the problem in the video might be known to many people but I don't know anything about these problems and its a lot of time-consuming effort to sort out these problems. If you are planning to build a machine than these problems might bow you and I don't want anyone to bow. So that's the only reason why I am building this video because without the proper electronic setup this build is nothing. The good thing is that after finding the actual fault which took around 2-3 months I finally properly able to run my machine. The build part is going to keep in a separate video. So stay tuned for that.

But frankly said If you are willing to build a 3 in 1 CNC make sure to use Duet Wifi Board. Its One of the best board you can find nowadays.

Download latest version of Arduino Here
https://www.arduino.cc/en/Main/Software

Arduino IDE & Marlin Configuration.h(info)
https://www.youtube.com/watch?v=a-qy5UOXeo4

COM port Driver
https://drive.google.com/open?id=1klP2fN0XguKH8kdo2s6Z3xtpNM0twup4

Marlin Firmware
http://marlinfw.org/meta/download/

How to set up the Marlin firmware! (info)
https://www.youtube.com/watch?v=3gwWVFtdg-4&t=17s

RAMPS 1.4 - Basics
https://www.youtube.com/watch?v=85nj3WDfUs8

Choosing and connecting stepper motors
https://duet3d.dozuki.com/Wiki/Choosing_and_connecting_stepper_motors

EMF calculator
https://www.reprapfirmware.org/

Duet wifi
https://duet3d.dozuki.com/Guide/1.)+Getting+Connected+to+your+Duet/7

Duet wifi Orignal
https://www.duet3d.com/DuetWifi
You can go with the display if you want but it's not necessary because you can easily be controlled it
using web interface which duet supports.

Duet Wifi Cloned Version
https://www.aliexpress.com/wholesale?catId=0&initiative_id=AS_20191215234102&SearchText=duet+wifi+2

TB6560 Driver
cleanuri.com/aVdEl4

3D Printer Board Adapter Module External High Power Switching Module for Microstep Driver
cleanuri.com/qnpA1Y

Igus Ball Screw
https://www.igus.in/info/lead-screw-units-lead-screw-units

Softwares You Might need to run machine
Pronterface
https://github.com/kliment/Printrun/releases/tag/printrun-1.6.0

Repetier
https://www.repetier.com/

Cura
https://ultimaker.com/software/ultimaker-cura

Voltage regulator
cleanuri.com/xpLAYN

Test stepper motor wire and coils
https://www.youtube.com/watch?v=1U9pf7S_ov4

500Watt spindle
cleanuri.com/KeXB87

Видео 3 in 1 CNC / 3d Printer Problems / Port Detection / Thermal Runaway / Extruder Motor / Step Skipping канала AMbros Custom 🇮🇳