ERRF 2023 - 5 GREAT THINGS
#ERRF #3dprinting #pcbway
PCBWay: https://www.pcbway.com/ @PCBWay
I attended my 2nd ERRF, and it was a blast! Lets take a look around and interview some people!
I purchased a new wireless mic and was able to filter out out a lot of the background noise this time around. The audio is far from perfect, but way better than MRRF 2023! It was either dealing with the background noise, or have a slight digital tone on some parts. I tried to hold the camera on two of the interviews, it didn't go very well, see if you can tell which ones they were? The wife stepped in as the videographer and did a much better job! My job once again was to play traffic cop to stop people from crossing in front of the camera LOL!
Interviewed Peeps!
LDO Motors - https://ldomotors.com/ @ldomotorsjason3488
Printer Solid - https://www.printedsolid.com/ @printedsolid
https://biqu.equipment/ @bigtreetech5117
https://greengate3d.com/ @greengate3d
https://thangs.com/ @Thangs3D
https://twitter.com/MidknightGiant
https://stldenise3d.com/ @stldenise
https://iofx.com/ @iofx1104
https://peopoly.net/ @peopoly
https://droidbuilders.info/
https://github.com/RobMink/Babybelt @RobMink
https://twitter.com/dddpworld @3DPrintingWorlds
https://www.youtube.com/ @Greendragonprints
https://www.youtube.com/ @FilamentFriday
https://www.sliceengineering.com/ @SliceEngineering
www.youtube.com/ @ChrisRiley
https://www.creality.com/ @Creality3D
https://twitter.com/gear3d_
https://bambulab.com/en @BambuLab
https://twitter.com/SirWill
Nathan Story - http://macrobot.us/
Death Racers
@TheRealSamPrentice
https://youtu.be/yF4NyfIXB5g?si=efJNA9wdnlZxzI26
Drag Racers
https://www.youtube.com/ @EDGEOF3D
https://youtu.be/57qYDEYNFz0?si=wI6f9xom6Z9tHpB4
instagram.com/offset_maker_lab
instagram.com/filamentstories @FilamentStories
Disclaimer - This is an instructional video only - I assume no responsibility if you do not become a pro after watching this video. This video is for learning purposes only, you are following the steps in this video at your own risk!
https://www.facebook.com/tripodsgarage/
https://twitter.com/tripodsgarage
https://www.instagram.com/tripodsgarage/
Thanks for watching - Please Like and Subscribe!
Tags
CR6-SE, CR6SE, 32-Bit Control Board, TMC2209 Stepper Motor Driver, 3D Printer, 3D Printing, CR-10, CR-10s, Ender 3, Ender 3Pro, Ender 5 Pro, Ender 5, @Creality3D silent board, silent board, BIRGTREETECH, SKR CR6V1.0, #Artillery Hornet, Artillery Genius, #Kywoo Tycoon Slim, #Ender5Plus #CR6SE, #FLSUN #SR #Superracer, Bondtech #FOKOOS #ODIN-5-f3 #3DPrinter #3DPrinting longerlk5pro longer3dprinter #LK5PRO 3D Printer Ender 3 Max, Creality Ender 3 Max Neo, Sovol SV01 Pro, #creality
Видео ERRF 2023 - 5 GREAT THINGS канала Tripods Garage
PCBWay: https://www.pcbway.com/ @PCBWay
I attended my 2nd ERRF, and it was a blast! Lets take a look around and interview some people!
I purchased a new wireless mic and was able to filter out out a lot of the background noise this time around. The audio is far from perfect, but way better than MRRF 2023! It was either dealing with the background noise, or have a slight digital tone on some parts. I tried to hold the camera on two of the interviews, it didn't go very well, see if you can tell which ones they were? The wife stepped in as the videographer and did a much better job! My job once again was to play traffic cop to stop people from crossing in front of the camera LOL!
Interviewed Peeps!
LDO Motors - https://ldomotors.com/ @ldomotorsjason3488
Printer Solid - https://www.printedsolid.com/ @printedsolid
https://biqu.equipment/ @bigtreetech5117
https://greengate3d.com/ @greengate3d
https://thangs.com/ @Thangs3D
https://twitter.com/MidknightGiant
https://stldenise3d.com/ @stldenise
https://iofx.com/ @iofx1104
https://peopoly.net/ @peopoly
https://droidbuilders.info/
https://github.com/RobMink/Babybelt @RobMink
https://twitter.com/dddpworld @3DPrintingWorlds
https://www.youtube.com/ @Greendragonprints
https://www.youtube.com/ @FilamentFriday
https://www.sliceengineering.com/ @SliceEngineering
www.youtube.com/ @ChrisRiley
https://www.creality.com/ @Creality3D
https://twitter.com/gear3d_
https://bambulab.com/en @BambuLab
https://twitter.com/SirWill
Nathan Story - http://macrobot.us/
Death Racers
@TheRealSamPrentice
https://youtu.be/yF4NyfIXB5g?si=efJNA9wdnlZxzI26
Drag Racers
https://www.youtube.com/ @EDGEOF3D
https://youtu.be/57qYDEYNFz0?si=wI6f9xom6Z9tHpB4
instagram.com/offset_maker_lab
instagram.com/filamentstories @FilamentStories
Disclaimer - This is an instructional video only - I assume no responsibility if you do not become a pro after watching this video. This video is for learning purposes only, you are following the steps in this video at your own risk!
https://www.facebook.com/tripodsgarage/
https://twitter.com/tripodsgarage
https://www.instagram.com/tripodsgarage/
Thanks for watching - Please Like and Subscribe!
Tags
CR6-SE, CR6SE, 32-Bit Control Board, TMC2209 Stepper Motor Driver, 3D Printer, 3D Printing, CR-10, CR-10s, Ender 3, Ender 3Pro, Ender 5 Pro, Ender 5, @Creality3D silent board, silent board, BIRGTREETECH, SKR CR6V1.0, #Artillery Hornet, Artillery Genius, #Kywoo Tycoon Slim, #Ender5Plus #CR6SE, #FLSUN #SR #Superracer, Bondtech #FOKOOS #ODIN-5-f3 #3DPrinter #3DPrinting longerlk5pro longer3dprinter #LK5PRO 3D Printer Ender 3 Max, Creality Ender 3 Max Neo, Sovol SV01 Pro, #creality
Видео ERRF 2023 - 5 GREAT THINGS канала Tripods Garage
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Artillery Hornet 3D Printer - Live Unboxing!3D Printing a TE-DO Droid!BEAR LOVES CARROTS! #dog #dogs #dogshorts #doglover #dogshorts3D Print Pictures into Lithophanes - How to 3D Print LithophanesCHANGES ARE COMING!Sam Prentice Presents - Interview with Tripod's Garage! The Ender 5 Plus Upgrade Debate!Smok'n live with Bear - We will be smoke'n a Pork Shoulder!Garage Makeover Part 1! Done by a guy with 1 leg?COMGROW AND TRIPOD'S GARAGE LIVE!How to build a workbench out of Extruded Aluminum is done! With a Bora Portamate PM-1100n Assembly!How to wire and install LED light Strips - Garage Makeover Part 5 - Vintage RC CarsAre $40 Cheap GoPro style action cameras any good? Review AKASO EK7000 Pro 4K action camera.Artillery Sidewinder X2 - Live UnboxingLet's Learn How to Solder Live!SOVOL SV01 PRO 3D PRINTER - Live Unboxing and First Print!IS IT TOO DANGEROUS TO USE A LASER ENGRAVER? XTOOL S1FOLDABLE PORTABLE LASER GENMITSU Z3 - From Sain SmartKywoo Tycoon Slim 3D Printer - First LookBIQU HURAKAN REVIEW - With Factory Installed KlipperCR6SE Upgrade - 30mm Hotend fan to 40mm RGB