CR6SE Upgrade - 30mm Hotend fan to 40mm RGB
#Creality #CR6SE #PCBWAY
Your First Order Free at PCBWay: https://www.pcbway.com/
I actually pulled the wrong hotend fan from my stash for the picture. I actually installed a 24v 40mm RGB fan. Make sure you use a 24v fan, link below.
WINSINN 40mm Color LED Fan 24V Hydraulic Bearing Brushless 4010 40x10mm - High Speed (Pack of 4Pcs) https://www.amazon.com/dp/B087TG5KH4/ref=cm_sw_r_cp_api_glt_fabc_HA4EKJ3SCDH8NNFBZ8W4
Been getting a lot of heat-creep on my prints, the most likely cause is the 30mm stock cooling fan. I decided to upgrade the cooling fan from a 30mm to a 40mm RGB. Why not RGB? RGB makes everything faster and better!
Creality CR 6 SE Hotend Fan Duct Adapter 40mm
https://www.thingiverse.com/thing:4610687
Printed Solid PLA - #Printedsolid
https://www.printedsolid.com/collections/1-75mm-jessie/products/jessie-pla-1-75mm-x-1kg-pure-cyan
Clockspring Vase - #clockspring
https://www.myminifactory.com/users/Clockspring
MicroSwiss Hotend - #microswiss
https://store.micro-swiss.com/collections/all-metal-hotend-kits/products/all-metal-hotend-kit-for-creality-cr-6-se
PRILINE Carbon Fiber Polycarbonate -
https://www.amazon.com/PRILINE-Polycarbonate-Filament-Dimensional-Accuracy/dp/B074DS3986?ref_=ast_sto_dp&th=1&psc=1
BIGTREETECH SKR CR6V1.0 - #BTT
https://www.biqu.equipment/products/bigtreetech-skr-cr6v1-0-mainboard-for-crealitycr-6s-e3d-printer?_pos=1&_sid=184308407&_ss=r
TH3D CR6-SE Power Switch - #TH3D
https://www.th3dstudio.com/product/creality-cr-6-replacement-power-switch-10a-rating-high-quality/
Harbor Freight workbench - https://www.harborfreight.com/tool-storage-organization/workbenches/60-in-4-drawer-hardwood-workbench-63395.html
Disclaimer - This is an instructional video only - I assume no responsibility if you do not become a pro after watching this video. This video is for learning purposes only, you are following the steps in this video at your own risk!
https://www.facebook.com/tripodsgarage/
https://twitter.com/tripodsgarage
https://www.instagram.com/tripodsgarage/
Thanks for watching - Please Like and Subscribe!
Tags
CR6-SE, CR6SE, 32-Bit Control Board, TMC2209 Stepper Motor Driver, 3D Printer, 3D Printing, CR-10, CR-10s, Ender 3, Ender 3Pro, Ender 5 Pro, Ender 5, creality silent board, silent board, BIRGTREETECH, SKR CR6V1.0
Видео CR6SE Upgrade - 30mm Hotend fan to 40mm RGB канала Tripods Garage
Your First Order Free at PCBWay: https://www.pcbway.com/
I actually pulled the wrong hotend fan from my stash for the picture. I actually installed a 24v 40mm RGB fan. Make sure you use a 24v fan, link below.
WINSINN 40mm Color LED Fan 24V Hydraulic Bearing Brushless 4010 40x10mm - High Speed (Pack of 4Pcs) https://www.amazon.com/dp/B087TG5KH4/ref=cm_sw_r_cp_api_glt_fabc_HA4EKJ3SCDH8NNFBZ8W4
Been getting a lot of heat-creep on my prints, the most likely cause is the 30mm stock cooling fan. I decided to upgrade the cooling fan from a 30mm to a 40mm RGB. Why not RGB? RGB makes everything faster and better!
Creality CR 6 SE Hotend Fan Duct Adapter 40mm
https://www.thingiverse.com/thing:4610687
Printed Solid PLA - #Printedsolid
https://www.printedsolid.com/collections/1-75mm-jessie/products/jessie-pla-1-75mm-x-1kg-pure-cyan
Clockspring Vase - #clockspring
https://www.myminifactory.com/users/Clockspring
MicroSwiss Hotend - #microswiss
https://store.micro-swiss.com/collections/all-metal-hotend-kits/products/all-metal-hotend-kit-for-creality-cr-6-se
PRILINE Carbon Fiber Polycarbonate -
https://www.amazon.com/PRILINE-Polycarbonate-Filament-Dimensional-Accuracy/dp/B074DS3986?ref_=ast_sto_dp&th=1&psc=1
BIGTREETECH SKR CR6V1.0 - #BTT
https://www.biqu.equipment/products/bigtreetech-skr-cr6v1-0-mainboard-for-crealitycr-6s-e3d-printer?_pos=1&_sid=184308407&_ss=r
TH3D CR6-SE Power Switch - #TH3D
https://www.th3dstudio.com/product/creality-cr-6-replacement-power-switch-10a-rating-high-quality/
Harbor Freight workbench - https://www.harborfreight.com/tool-storage-organization/workbenches/60-in-4-drawer-hardwood-workbench-63395.html
Disclaimer - This is an instructional video only - I assume no responsibility if you do not become a pro after watching this video. This video is for learning purposes only, you are following the steps in this video at your own risk!
https://www.facebook.com/tripodsgarage/
https://twitter.com/tripodsgarage
https://www.instagram.com/tripodsgarage/
Thanks for watching - Please Like and Subscribe!
Tags
CR6-SE, CR6SE, 32-Bit Control Board, TMC2209 Stepper Motor Driver, 3D Printer, 3D Printing, CR-10, CR-10s, Ender 3, Ender 3Pro, Ender 5 Pro, Ender 5, creality silent board, silent board, BIRGTREETECH, SKR CR6V1.0
Видео CR6SE Upgrade - 30mm Hotend fan to 40mm RGB канала Tripods Garage
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Artillery Hornet 3D Printer - Live Unboxing!3D Printing a TE-DO Droid!BEAR LOVES CARROTS! #dog #dogs #dogshorts #doglover #dogshorts3D Print Pictures into Lithophanes - How to 3D Print LithophanesCHANGES ARE COMING!Sam Prentice Presents - Interview with Tripod's Garage! The Ender 5 Plus Upgrade Debate!Smok'n live with Bear - We will be smoke'n a Pork Shoulder!Garage Makeover Part 1! Done by a guy with 1 leg?COMGROW AND TRIPOD'S GARAGE LIVE!How to build a workbench out of Extruded Aluminum is done! With a Bora Portamate PM-1100n Assembly!How to wire and install LED light Strips - Garage Makeover Part 5 - Vintage RC CarsAre $40 Cheap GoPro style action cameras any good? Review AKASO EK7000 Pro 4K action camera.Artillery Sidewinder X2 - Live UnboxingLet's Learn How to Solder Live!IS IT TOO DANGEROUS TO USE A LASER ENGRAVER? XTOOL S1LASER ENGRAVE HARBOR FREIGHT TOOLS WITH THE XTOOL F1 ULTRAKywoo Tycoon Slim 3D Printer - First LookFOLDABLE PORTABLE LASER GENMITSU Z3 - From Sain SmartBIQU HURAKAN REVIEW - With Factory Installed KlipperERRF 2023 - 5 GREAT THINGS