What 3D printing material to use for object inside a car? Temperature test
Few times I wanted to 3D print an object which will be inside my car, but I was not sure which material to use. On internet there are so different information, but they must be different, depend where the author lives. So, I decided to do my own test with 7 materials. On test probes I placed M10 screw nut, just to add minimal load to objects. I chose 10 very hot days in a row, during this test, I always placed my car on hottest sun, turned to the South, but since here in Budapest (45° latitude) summer is not too hot, last part of the test is simulating higher temperatures in oven.
Contents:
0:00 introduction
1:18 tested materials
5:16 about temperatures inside car
7:14 testing from day 1 to day 10
15:57 analyzing test probes after 10 days
17:14 oven test
18:34 conclusions
Materials in this test:
PLA+, Gembird
HT PLA, 3Dee
PolyPlus PLA, Polymaker
PETG, Herz
ABS, Prusament
ASA, Prusament
Nylon, Gembird
(only in oven test) Elegoo Water Washable Photopolymer resin printed on Elegoo Mars
Other materials and methods:
- Prusa MK3 3d printer,
- Elegoo Arduino Uno R3
- LM35DZ temperature sensors,
- Analog 1-100°C thermometer
Budapest Latitude:
https://latitudelongitude.org/hu/budapest/
Test probe can be downloaded from my website:
http://www.mytechfun.com/video/58
Parked car temperatures:
https://www.carrentals.com/blog/temperature-inside-car/
Mentioned Arduino data logger video:
(soon)
Support my work over patreon:
https://www.patreon.com/mytechfun
Видео What 3D printing material to use for object inside a car? Temperature test канала My Tech Fun
Contents:
0:00 introduction
1:18 tested materials
5:16 about temperatures inside car
7:14 testing from day 1 to day 10
15:57 analyzing test probes after 10 days
17:14 oven test
18:34 conclusions
Materials in this test:
PLA+, Gembird
HT PLA, 3Dee
PolyPlus PLA, Polymaker
PETG, Herz
ABS, Prusament
ASA, Prusament
Nylon, Gembird
(only in oven test) Elegoo Water Washable Photopolymer resin printed on Elegoo Mars
Other materials and methods:
- Prusa MK3 3d printer,
- Elegoo Arduino Uno R3
- LM35DZ temperature sensors,
- Analog 1-100°C thermometer
Budapest Latitude:
https://latitudelongitude.org/hu/budapest/
Test probe can be downloaded from my website:
http://www.mytechfun.com/video/58
Parked car temperatures:
https://www.carrentals.com/blog/temperature-inside-car/
Mentioned Arduino data logger video:
(soon)
Support my work over patreon:
https://www.patreon.com/mytechfun
Видео What 3D printing material to use for object inside a car? Temperature test канала My Tech Fun
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
3D printing functional car parts with ApolloXASA vs PLA 3D printed bolts and screw nutsWhat's the temperature resistance of annealed PLA, PETG and ABS?Do 3D Prints melt in your car in summer?3D Printing in a 100°C Heated Chamber - Lessons LearnedPLA vs PETG vs ABS vs Carbon Fiber vs Polycarbonate Thermal TestHow much STRONGER is PLA+ really?The BEST 3D printing material? Comparing PLA, PETG & ASA (ABS) - feat. PRUSAMENT by Josef PrusaCan you leave 3D Prints outside? PLA in the sun for a year!About food safe 3D printing3D printing engineering parts: PLA vs ASA vs PC vs PP vs nylon vs tough resin3D Printed Car Parts? We put ASA to the test!Solving problems with 3D printing: Upgrade your car!Replacing Drivetrain Parts with 3D Printed Carbon Fiber Nylon - FOR SCIENCE!PLA vs PLA+ vs PETG: Testing Eryone filaments from mechanical strength aspect3d Printing ASA For Beginners (Ender 3) Most Underrated Filament?3D Printed CHAIN - PLA vs ABS vs PETG - Which Material Performs The Best?Strong 3D prints through ANNEALING, but... Part 1: PLARevised: 3D Printing - 13 Things I Wish I Knew When I Got StartedHigh Temp 3D Printing FOR NASA with Vision Miner