ASA vs PLA 3D printed bolts and screw nuts
Let's compare PLA vs ASA 3D printed bolts and screw nuts. ASA (Acrylic Styrene Acrylonitrile) is a technical material that is considered a successor to ABS. ASA is UV resistant and has higher heat deflection temperatures, but it is harder for printing, it requires higher temperatures, brim and some enclosure. This test is not only about ASA or PLA 3D printed bolts, but more about understanding properties of these materials.
Materials I used in this test:
Gembird PLA printed on Prusa MK3s
Prusament ASA printed on Ender3 V2
Ender 3 V2 on banggood (affiliate):
https://www.banggood.com/custlink/GGvh5E38Rt
Creality small enclosure (affiliate):
https://www.banggood.com/custlink/3KKEFjewOn
Digital torque wrench (smallest 0.3-30 Nm)
https://www.banggood.com/custlink/mD3hVIkGvv
Contents:
0:00 in this video
0:22 introduction
2:12 designing bolts and nuts in Fusion360
3:00 cutting the bolt in slicer
3:24 3D printing PLA and ASA
4:49 analyzing bolts and nuts
9:00 pulling (tensile) test for bolts
9:43 tensile test results
9:53 shear stress for bolts
10:34 shear tests results
10:44 torque test for bolts
11:43 bolt torque test results
11:52 pulling test for nuts
12:30 results of nut pulling test
12:40 torque test for screw nuts
13:49 results of nut torque test
13:54 impact test
15:22 results of impact test
15:28 temperature test
16:03 conclusions
Mentioned videos:
Horizontally 3D printed bolts without supports:
https://youtu.be/E3WRBp-T42o
3D printed object inside car - temperature test
https://youtu.be/QdAKd_YbsjI
FDM vs SLA test:
https://youtu.be/k5xxZKv7IRg
Support my work over Patreon:
https://www.patreon.com/mytechfun
or (PayPal link available):
http://www.mytechfun.com/donation
Видео ASA vs PLA 3D printed bolts and screw nuts канала My Tech Fun
Materials I used in this test:
Gembird PLA printed on Prusa MK3s
Prusament ASA printed on Ender3 V2
Ender 3 V2 on banggood (affiliate):
https://www.banggood.com/custlink/GGvh5E38Rt
Creality small enclosure (affiliate):
https://www.banggood.com/custlink/3KKEFjewOn
Digital torque wrench (smallest 0.3-30 Nm)
https://www.banggood.com/custlink/mD3hVIkGvv
Contents:
0:00 in this video
0:22 introduction
2:12 designing bolts and nuts in Fusion360
3:00 cutting the bolt in slicer
3:24 3D printing PLA and ASA
4:49 analyzing bolts and nuts
9:00 pulling (tensile) test for bolts
9:43 tensile test results
9:53 shear stress for bolts
10:34 shear tests results
10:44 torque test for bolts
11:43 bolt torque test results
11:52 pulling test for nuts
12:30 results of nut pulling test
12:40 torque test for screw nuts
13:49 results of nut torque test
13:54 impact test
15:22 results of impact test
15:28 temperature test
16:03 conclusions
Mentioned videos:
Horizontally 3D printed bolts without supports:
https://youtu.be/E3WRBp-T42o
3D printed object inside car - temperature test
https://youtu.be/QdAKd_YbsjI
FDM vs SLA test:
https://youtu.be/k5xxZKv7IRg
Support my work over Patreon:
https://www.patreon.com/mytechfun
or (PayPal link available):
http://www.mytechfun.com/donation
Видео ASA vs PLA 3D printed bolts and screw nuts канала My Tech Fun
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
3d Printing ASA For Beginners (Ender 3) Most Underrated Filament?3D Printed WORM GEAR - Can u Really Use Them? (PLA vs PETG vs ABS)What 3D printing material to use for object inside a car? Temperature testCreep test with 3D printed plastic materials: PLA, PETG, ASA, NylonUV resistent alternative to ABS? - Plastika Trček ASA filament REVIEWZesty Nimble V3 - An ideal hybrid or just a compromise?3D Printed PLA Gear after 2 Years? - Spur Gear Tool in Fusion360PLA vs PETG vs ABS vs Carbon Fiber vs Polycarbonate Thermal TestThe BEST 3D printing material? Comparing PLA, PETG & ASA (ABS) - feat. PRUSAMENT by Josef Prusa3D printing functional car parts with ApolloX3D Printing For Outdoor Use: Materials Comparison - PLA, ABS, Nylon, PETG, TPU, ASASiraya Blu vs Tenacious vs 50-50% mix3D Printed Car Parts? We put ASA to the test!Which LAYER HEIGHT gives you the STRONGEST 3D prints?How much STRONGER is PLA+ really?Improve your prints with acetone smoothing3D printing bolt and thread in horizontal or vertical position - strength test3D printing engineering parts: PLA vs ASA vs PC vs PP vs nylon vs tough resinPLA vs PLA+ vs PETG: Testing Eryone filaments from mechanical strength aspect