12v LED pole work lights conversion

These are 12v LED worklights I made up from small 120v 100w worklights. Mounted on steel poles that are welded to bolts, so I can unscrew them from the heavy bases (which are made from old flywheels from lawntractor engines), I have removed the halogen bulb, made a support for the LED panels using an old ball-point pen tube, and slid this into place. I soldered wires to the original plug, put clips on them for battery connection. One of them can slide up/down the pole, as you can see in the video. I use them quite a bit. The lights can easily be converted back to 120vac use again, if need be.
Once I have a large enough solar panel to charge my batteries, I will be using (almost) free light in the garage.

Видео 12v LED pole work lights conversion канала ZackaryMac