#82.5 - No Comment #2 - Tapered Octagon
http://www.halfinchshy.com/2013/05/no-comment-2-tapered-octagon.html
The tapered octagon piercing through the shaped demi-lune top of the Tim Burton table (formerly known as No Comment #2) involves the nemesis of most woodworkers: compound angles (the stair builders are laughing right now...)
True, compound angles are more complicated than square cuts with a square blade by a square woodworker :) ("triple square cuts"), but some techniques can make them really easy to work with and get great results.
In this episode, a large part deals with cutting and Domino-ing the triangles that make up the tapered octagon along with some tips on eye-balling the cut with an angled fence and how to recover from Dominoing with a less than perfect bevel angle setting. The Domino trick actually comes in really useful in the triple-square arena as well.
There was a lot of interest in the new-to-me technique of using the Domizilla to mortise through multiple parts simultaneously; the process is really easy (though I over-explain, I know), but saves on a lot of awkward calculation of other compound angles.
Next up will be a short video on how to measure a compound angle off a project; this is really useful when you are making an n-sided object... make n-1 sides according to your formula and tool settings then calculate the last perfect-fitting piece directly off the rest. The savings in caulk alone make this worthwhile to learn!
Sorry it's longer than I expected... jeez, it's just a tapered octagon!
The full-build blog article can be found here: http://www.halfinchshy.com/2013/02/no-comment-2-full-build.html
The article and video on the Angle Madness - Jigs referenced in this video can be found here: http://www.halfinchshy.com/2012/04/angle-madness-jigs.html
Видео #82.5 - No Comment #2 - Tapered Octagon канала Half-Inch Shy
The tapered octagon piercing through the shaped demi-lune top of the Tim Burton table (formerly known as No Comment #2) involves the nemesis of most woodworkers: compound angles (the stair builders are laughing right now...)
True, compound angles are more complicated than square cuts with a square blade by a square woodworker :) ("triple square cuts"), but some techniques can make them really easy to work with and get great results.
In this episode, a large part deals with cutting and Domino-ing the triangles that make up the tapered octagon along with some tips on eye-balling the cut with an angled fence and how to recover from Dominoing with a less than perfect bevel angle setting. The Domino trick actually comes in really useful in the triple-square arena as well.
There was a lot of interest in the new-to-me technique of using the Domizilla to mortise through multiple parts simultaneously; the process is really easy (though I over-explain, I know), but saves on a lot of awkward calculation of other compound angles.
Next up will be a short video on how to measure a compound angle off a project; this is really useful when you are making an n-sided object... make n-1 sides according to your formula and tool settings then calculate the last perfect-fitting piece directly off the rest. The savings in caulk alone make this worthwhile to learn!
Sorry it's longer than I expected... jeez, it's just a tapered octagon!
The full-build blog article can be found here: http://www.halfinchshy.com/2013/02/no-comment-2-full-build.html
The article and video on the Angle Madness - Jigs referenced in this video can be found here: http://www.halfinchshy.com/2012/04/angle-madness-jigs.html
Видео #82.5 - No Comment #2 - Tapered Octagon канала Half-Inch Shy
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
#38.12 - Sculpted Mahogany Vanity - Part 12 - Wet Sanding and Installation#38.4 - Sculpted Mahogany Vanity - Part 4 - Completing Bottom Segment#8 - Festool Guide Rail Storage Short#30.3 - Quilted Maple Frames - Part Tres - Assembly and Finishing#90.2 - Hand-Cut Dovetails on Compound-Angles - Tidbits#47.5 - Dovetailing Drawers - Signature Dovetails#38.1 - Sculpted Mahogany Vanity - Part 1 - The Start#23 - '39 Ford#78 - WIA'12-Pasadena - Metropolis II at LACMA#94 - Simple Resaw-Fence Dust Channel#34 - Shop Tips#82.3 - No Comment #2 - Design Overview#82.8 - No Comment #2 - Dem Legs#82.2 - No Comment #2 - Full Build - Guitar Edition v11.0#33.3 - Lil' Boxes for a Jewelry Box with the JMPv2 - Part Tres#38.7 - Sculpted Mahogany Vanity - Part 7 - Dimensioning Drawer Stock#18.2 - Festool Domino Review - Part 2 - The Dominos#97 - Review of Two WoodRiver Vises: Pattern Makers' and Gunstock#88 - Refreshing a Guiderail Splinterguard and Dimple Marking Technique#7.2 - Festool OF-1400 Router Review - Part 2