#97 - Review of Two WoodRiver Vises: Pattern Makers' and Gunstock
http://HalfInchShy.com
Long ago, I drooled on the Tucker vise page of the Lee Valley catalog. Seemed really nice; seemed really expensive. So I punted and got a typical quick-release vise. Works great, for flat stuff.
Recently, I took a class from Michael Fortune and had him over to my shop. Showed him my projects and he recommended these two vises from WoodRiver.
The Pattern Makers' vise is an Emmert vise-like vise (as was the Tucker, which is no longer made). The Gunstock vise is a different style vise, but has a lot of uses.
In this review, I'll show you what they do and how I used them on some curved and tapered table legs I'm working on right now.
They aren't cheap so getting a chance to see them swing around and how you can use them is likely a good thing.
Видео #97 - Review of Two WoodRiver Vises: Pattern Makers' and Gunstock канала Half-Inch Shy
Long ago, I drooled on the Tucker vise page of the Lee Valley catalog. Seemed really nice; seemed really expensive. So I punted and got a typical quick-release vise. Works great, for flat stuff.
Recently, I took a class from Michael Fortune and had him over to my shop. Showed him my projects and he recommended these two vises from WoodRiver.
The Pattern Makers' vise is an Emmert vise-like vise (as was the Tucker, which is no longer made). The Gunstock vise is a different style vise, but has a lot of uses.
In this review, I'll show you what they do and how I used them on some curved and tapered table legs I'm working on right now.
They aren't cheap so getting a chance to see them swing around and how you can use them is likely a good thing.
Видео #97 - Review of Two WoodRiver Vises: Pattern Makers' and Gunstock канала Half-Inch Shy
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Pattern Maker's Woodworking Vise - InstallationMy new project! Emmert Pattern Makers VicesMake It - Moxon Vise#93 - Shop Organization TipsWooden Bench Vise making / free PDF plan / DIYWorkbench Vises - 232The Woodcraft Series - Spoon Carving, Anna CasserleyInstalling a WorkBench Vise // How To - Woodworking#29 - Disappearing Miter Saw Stand: The VideoMaking A Big 16” Vise from Tube and Plate.Installing an HNT GORDON Tail Vice at the Unplugged Woodshop TorontoEmmert Pattern Makers Vise Repair: Turning a New Pin on a LatheWood River Chisel Plane Unboxing & ReviewWooden Vise Making DIY +PDFWHAT VISE IS THE STRONGEST?Split Top Roubo 3 Years Later: A ReviewSjobergs Elite Cabinetmakers Bench Presented by WoodcraftWilton Vise Restoration Part 1: Disassembly and CleaningHow To Make A Woodworking Vise / Quick ReleaseMaking this Twin Screw Gear Linked Vise