How to Upgrade an Electrical Panel to 200-Amp Service (Part 2) | This Old House
Master electrician Scott Caron installs a new panel to complete a service upgrade.
Watch part one here: https://www.youtube.com/watch?v=LuEAVdpny2U&index=184&list=PLkJADc1qDrr_0NxtmzECiOWkr5de82kXV
#ThisOldHouse #AskTOH
SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse
Steps:
1. Use diagonal-cutting pliers to sever all wires inside existing electrical panel.
2. Unscrew and remove old electrical panel from the wall.
3. Screw a large ¾-inch-thick plywood panel to the wall for mounting the new electrical panel. 4. Feed the SE cable through the top of the new electrical panel, then screw the panel to the plywood. Use a torpedo level to ensure the panel is level.
5. Make all the electrical connections inside the electrical panel.
6. Feed the house circuits into the panel, making sure each cable passes through a cable connector.
7. Connect the bare-copper ground wires and white-insulated wires to the ground and neutral bar inside the panel.
8. Plug new circuit breakers into the bus bar.
9. Run the main ground wire from the bottom of the electrical panel to the copper water main.
10. Have the utility company reconnect the electrical cables to the exterior of the house.
11. Label each breaker with the correct house circuit.
About This Old House TV:
This Old House is the No. 1 multimedia home enthusiast brand, offering trusted information and expert advice through award-winning television, a highly regarded magazine, and an information-driven website. This Old House and Ask This Old House are produced by This Old House Ventures, LLC and are presented on PBS by WGBH Boston.
Follow This Old House and Ask This Old House:
Facebook: http://bit.ly/ThisOldHouseFB
Twitter: http://bit.ly/ThisOldHouseTwitter
http://bit.ly/AskTOHTwitter
Pinterest: http://bit.ly/ThisOldHousePinterest
Instagram: http://bit.ly/ThisOldHouseIG
Tumblr: http://bit.ly/ThisOldHouseTumblr
How to Upgrade an Electrical Panel to 200-Amp Service (Part 2) | This Old House
https://www.youtube.com/user/thisoldhouse/
Видео How to Upgrade an Electrical Panel to 200-Amp Service (Part 2) | This Old House канала This Old House
Watch part one here: https://www.youtube.com/watch?v=LuEAVdpny2U&index=184&list=PLkJADc1qDrr_0NxtmzECiOWkr5de82kXV
#ThisOldHouse #AskTOH
SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse
Steps:
1. Use diagonal-cutting pliers to sever all wires inside existing electrical panel.
2. Unscrew and remove old electrical panel from the wall.
3. Screw a large ¾-inch-thick plywood panel to the wall for mounting the new electrical panel. 4. Feed the SE cable through the top of the new electrical panel, then screw the panel to the plywood. Use a torpedo level to ensure the panel is level.
5. Make all the electrical connections inside the electrical panel.
6. Feed the house circuits into the panel, making sure each cable passes through a cable connector.
7. Connect the bare-copper ground wires and white-insulated wires to the ground and neutral bar inside the panel.
8. Plug new circuit breakers into the bus bar.
9. Run the main ground wire from the bottom of the electrical panel to the copper water main.
10. Have the utility company reconnect the electrical cables to the exterior of the house.
11. Label each breaker with the correct house circuit.
About This Old House TV:
This Old House is the No. 1 multimedia home enthusiast brand, offering trusted information and expert advice through award-winning television, a highly regarded magazine, and an information-driven website. This Old House and Ask This Old House are produced by This Old House Ventures, LLC and are presented on PBS by WGBH Boston.
Follow This Old House and Ask This Old House:
Facebook: http://bit.ly/ThisOldHouseFB
Twitter: http://bit.ly/ThisOldHouseTwitter
http://bit.ly/AskTOHTwitter
Pinterest: http://bit.ly/ThisOldHousePinterest
Instagram: http://bit.ly/ThisOldHouseIG
Tumblr: http://bit.ly/ThisOldHouseTumblr
How to Upgrade an Electrical Panel to 200-Amp Service (Part 2) | This Old House
https://www.youtube.com/user/thisoldhouse/
Видео How to Upgrade an Electrical Panel to 200-Amp Service (Part 2) | This Old House канала This Old House
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
How to Upgrade an Electric Meter to 200-Amp Service (Part 1) | This Old HouseHow to Wire an Electrical Panel - Square D120V 240V Electricity explained - Split phase 3 wireHow to Install a Ceiling Fan on a Cathedral Ceiling | Ask This Old HouseIDEAL National Championship 2019 Pro Finals: Service Entrance Cable, Torque, Panels and Breakers⚡ How to Upgrade your Main Breaker Panel. Step by Step Guide 🏠2 Prong Receptacle Circuit Replaced by GFCI and Grounded Receptacles per 2020 NECMeter Base Installation W/ DisconnectNew Garage Outlet From Panel--VERY DETAILED! (New Circuit / GFCI / Breaker Box / FULL INSTALL!)How to Add Outlets to a Room | Ask This Old HouseHow to Install an Automatic Standby Generator | Ask This Old HouseHow to Add Overhead Lighting to a Bedroom | All About Lights | Ask This Old HouseUnderstanding Your Home's Electrical System: The Main Panel5 Signs it's time to upgrade the electrical panelWhy Neutrals and Grounds are Separated in a Sub PanelHow to Install a SubpanelHow to Run Underground Power to a Shed | Ask This Old HouseHow to Install Surge Protection | Ask This Old HouseHow to Ground a Two-Prong Electrical Outlet | Ask This Old HouseHow to Wire for a New Ceiling Light | All About Lights | Ask This Old House