New Garage Outlet From Panel--VERY DETAILED! (New Circuit / GFCI / Breaker Box / FULL INSTALL!)

AFFILIATE MATERIAL/TOOL LINKS:
Armorlite Metal Clad Cable 100’:
http://bit.ly/ArmorMetalCladCable100
Hubbell Metal Junction Box:
http://bit.ly/HubbellMetalJBox
Levitron GFCI Outlet 20 amp:
http://bit.ly/LevitronGFCIOutlet20
Southwire 12/2 15’ Wire:
http://bit.ly/Southwire122Wire
TOOLS:
Irwin 6” Vise-Grip Cutting Pliers:
http://bit.ly/Irwin6CuttingPliers
WIHA Long Reach 7pc Screwdriver Set:
http://bit.ly/WIHA7pcInsulScrewdriverSet
Milwaukee Drill/Driver Combo:
http://bit.ly/MilwaukeeDrillDriver
Irwin Lineman’s Pliers:
http://bit.ly/IrwinLinemansPliers
Sperry Outlet Tester:
http://bit.ly/SperryOutletTester

QUICK ACCESS VIDEO GUIDE:
Panel Discussion: 2:56
Junction Box Installation: 4:37
Metal Clad Cable Installation: 14:01
Outlet Installation: 30:50
Panel Wiring: 37:48

Every garage could use more gfci outlets! In this video, The Honest Carpenter teams up with Harrison Peacock of CCS TRIANGLE ELECTRIC, in Wake Forest, NC. Harrison is demonstrating a full installation of a new gfci outlet, on a new circuit, from the panel/breaker box.

Harrison is a great electrician! If you live in the Raleigh-Durham area and need an electrician or electrical services, contact them through these links below:

CCS TRIANGLE ELECTRIC (WAKE FOREST/RALEIGH/DURHAM/CARY, NORTH CAROLINA)
919-500-1435
Website: http://triangleelectrician.com/
Facebook: https://www.facebook.com/ccstriangle/

New GFCI Outlet / New Circuit / Full Installation From Panel or Breaker Box:
1) Assess Panel; Remove Panel Cover
2) Plan junction box placement above panel
3) Knock out junction box holes; place junction box on wall using drywall anchors and screws
4) Strip braided metal clad cable; pull wire into junction box; join cable to romex wire with wire nuts
5) Mount metal clad cable around room to outlet location using drywall anchors and straps
6) Install outlet box
7) Wire new gfci outlet to cable; install plate cover for gfci outlet
8) Strip and connect romex wire to panel; install new circuit; close panel
9) Test outlet

(For more detail on installation, follow closely along with the video)

Check out our other video with Harrison:
https://youtu.be/t3F0dwsBFjw

Be sure to visit us at The Honest Carpenter Website:
https://thehonestcarpenter.com/
PLEASE NOTE: Harrison is a licensed electrician in the state of North Carolina. Working in a panel or breaker box, installing new circuits / new outlets is inherently dangerous. If you are not a licensed electrician, please do not undertake this project without the supervision of a professional. All work is undertaken at your own risk!

Видео New Garage Outlet From Panel--VERY DETAILED! (New Circuit / GFCI / Breaker Box / FULL INSTALL!) канала The Honest Carpenter