How to Install an Automatic Standby Generator | Ask This Old House

This Old House host Kevin O'Connor describes how to combat power outages with a standby generator.

#ThisOldHouse #AskTOH
SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse

Steps for How to Install an Automatic Standby Generator
1. Install the generator at least 5 feet from all windows and doors.
2. Set the generator on top of a pre-cast concrete pad that's supported by a compacted gravel bed.
3. Secure the generator to the pad with four stainless-steel bolts.
4. Have a plumber connect a natural-gas line to the generator.
5. Have an electrician run a line-voltage cable to the generator.
6. The generator tests itself automatically by turning on every two weeks and running for about 20 minutes.
7. Each time the generator kicks on, a diagnostic signal is sent via the Internet to the homeowner and electrician.
8. A transfer switch is installed beside the electrical meter; it sends electricity into the house when the power goes out and the generator kicks on.

About This Old House TV:
This Old House is the No. 1 multimedia home enthusiast brand, offering trusted information and expert advice through award-winning television, a highly regarded magazine, and an information-driven website. This Old House and Ask This Old House are produced by This Old House Ventures, LLC and are presented on PBS by WGBH Boston.

Follow This Old House and Ask This Old House:
Facebook: http://bit.ly/ThisOldHouseFB
Twitter: http://bit.ly/ThisOldHouseTwitter
http://bit.ly/AskTOHTwitter
Pinterest: http://bit.ly/ThisOldHousePinterest
Instagram: http://bit.ly/ThisOldHouseIG
Tumblr: http://bit.ly/ThisOldHouseTumblr

How to Install an Automatic Standby Generator | Ask This Old House
https://www.youtube.com/user/thisoldhouse/

Видео How to Install an Automatic Standby Generator | Ask This Old House канала This Old House