Making a Custom Bass Guitar Build #1 Bridge
I'm going to make a bass that references the sound of a double bass.
For this video, I made the bridge (piece) out of machined brass and maple.
I made an original piezo pickup and built it into the bridge.
The bass I used for the pickup test is the first one.
https://youtu.be/LjBTWVeJOC8
I've been getting feedback that my old piezo pickup sounded like an old double bass piezo, so I decided to use the latest? I made a pickup with the latest piezo element.
The previous pickup had howling and a rough high-pitched sound that I managed to suppress with a capacitor, but this piezo pickup has this sound without a capacitor and with a direct amplifier.
The capacitance of the piezo element, the low cutoff frequency range, and the impedance of the amplifier... it's hard to say.
I have learned a lot by talking to the manufacturer of the piezo pickup.
Thank you very much.
In order to give more distortion, I devised the structure of the pickup.
This is a secret. But it's not that complicated.
The video I'm being asked to make may not be like this, but what I'm looking for is work like this, so I'll try my best to enjoy it and step into the extreme.
I look forward to working with you.
BGMProject2 (Shunnosuke Kaneko) "The Bar with Sherlock
https://www.instagram.com/syunnosukekaneko/
https://www.youtube.com/channel/UCUg8oQ6mCshEUc1Z07vZb4Q/featured
Parts and tools used
Wera Kraftform diamond screwdriver
https://amzn.to/2ZVG6MB Number 2 of +.
https://amzn.to/3iVTl7u + number 1
TONE Power Grip Screwdriver Set PLPGD6
https://amzn.to/2Q5MrRr
VESSEL Precision Hex Drivers
Set, https://amzn.to/2O6hFoC
1.27(inch)https://amzn.to/2X4xBvQ
1.5https://amzn.to/34KDAZs
Fret Polishing 3M Sponge Polishing
320-600 https://amzn.to/2YC5c0k
800-1000 https://amzn.to/2JnIEd9
1200-1500 https://amzn.to/32iG29c
Metal Polishing also Picard
https://amzn.to/32Ip7f7
For masking tape, 3M is good. For high frets on guitars, 6mm is recommended.
https://amzn.to/32H0gZ9
Dremel 4000 rotor. Great torque, but hot! If you can, get a 4000 because it can do a lot of things.
https://amzn.to/2Kh3NH5
I heard there is a new one called 4300. If you can use the base plate of a StuMac, this might work too.
https://amzn.to/3712F48
3M body polishing compound, this is enough for a guitar.
https://amzn.to/34WHuhO
It's good to have a lot of stuff, orange English oil for fingerboard
https://amzn.to/2Kh4G2n
This cloth is very good. Recommended. Seriously.
https://amzn.to/2PRUJM8
Website
https://pedaru.wixsite.com/andybassandguitar
Twitter
https://twitter.com/Andybassguitar
Facebook
https://www.facebook.com/Andybassguitar/
Instagram
https://www.instagram.com/adachi_andy_koki
#make
#asmr
#andy_bass_and_guitar
Видео Making a Custom Bass Guitar Build #1 Bridge канала Andy bass & guitar
For this video, I made the bridge (piece) out of machined brass and maple.
I made an original piezo pickup and built it into the bridge.
The bass I used for the pickup test is the first one.
https://youtu.be/LjBTWVeJOC8
I've been getting feedback that my old piezo pickup sounded like an old double bass piezo, so I decided to use the latest? I made a pickup with the latest piezo element.
The previous pickup had howling and a rough high-pitched sound that I managed to suppress with a capacitor, but this piezo pickup has this sound without a capacitor and with a direct amplifier.
The capacitance of the piezo element, the low cutoff frequency range, and the impedance of the amplifier... it's hard to say.
I have learned a lot by talking to the manufacturer of the piezo pickup.
Thank you very much.
In order to give more distortion, I devised the structure of the pickup.
This is a secret. But it's not that complicated.
The video I'm being asked to make may not be like this, but what I'm looking for is work like this, so I'll try my best to enjoy it and step into the extreme.
I look forward to working with you.
BGMProject2 (Shunnosuke Kaneko) "The Bar with Sherlock
https://www.instagram.com/syunnosukekaneko/
https://www.youtube.com/channel/UCUg8oQ6mCshEUc1Z07vZb4Q/featured
Parts and tools used
Wera Kraftform diamond screwdriver
https://amzn.to/2ZVG6MB Number 2 of +.
https://amzn.to/3iVTl7u + number 1
TONE Power Grip Screwdriver Set PLPGD6
https://amzn.to/2Q5MrRr
VESSEL Precision Hex Drivers
Set, https://amzn.to/2O6hFoC
1.27(inch)https://amzn.to/2X4xBvQ
1.5https://amzn.to/34KDAZs
Fret Polishing 3M Sponge Polishing
320-600 https://amzn.to/2YC5c0k
800-1000 https://amzn.to/2JnIEd9
1200-1500 https://amzn.to/32iG29c
Metal Polishing also Picard
https://amzn.to/32Ip7f7
For masking tape, 3M is good. For high frets on guitars, 6mm is recommended.
https://amzn.to/32H0gZ9
Dremel 4000 rotor. Great torque, but hot! If you can, get a 4000 because it can do a lot of things.
https://amzn.to/2Kh3NH5
I heard there is a new one called 4300. If you can use the base plate of a StuMac, this might work too.
https://amzn.to/3712F48
3M body polishing compound, this is enough for a guitar.
https://amzn.to/34WHuhO
It's good to have a lot of stuff, orange English oil for fingerboard
https://amzn.to/2Kh4G2n
This cloth is very good. Recommended. Seriously.
https://amzn.to/2PRUJM8
Website
https://pedaru.wixsite.com/andybassandguitar
https://twitter.com/Andybassguitar
https://www.facebook.com/Andybassguitar/
https://www.instagram.com/adachi_andy_koki
#make
#asmr
#andy_bass_and_guitar
Видео Making a Custom Bass Guitar Build #1 Bridge канала Andy bass & guitar
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![Making a Custom Bass Guitar Build #2 Make tailpiece and control box](https://i.ytimg.com/vi/JzwjmgSZ1eE/default.jpg)
![The Best and Worst Basses of 2021](https://i.ytimg.com/vi/dUXz8CLsBSc/default.jpg)
![The Making Of Electric Upright double Bass Guitar For Sale!](https://i.ytimg.com/vi/tVyXskyXQFk/default.jpg)
![HOW TO PLAY FUNK... on upright & electric bass](https://i.ytimg.com/vi/NeHJxxzfiOU/default.jpg)
![Nick Villalobos - NS Electric Upright Bass demonstration](https://i.ytimg.com/vi/25tnJfMRkhg/default.jpg)
![Yamaha SLB300 Silent Bass - First Impressions with Sam Anning](https://i.ytimg.com/vi/-r9pLh5IXk0/default.jpg)
![Yamaha New Generation Silent Bass SLB300](https://i.ytimg.com/vi/SrdHO_eIxqM/default.jpg)
![The Krivo Magnetic Bass Pickup!](https://i.ytimg.com/vi/vKHILBQQQrQ/default.jpg)
![What does a plastic double bass sound like? DIY- Building a Real Bass from Polycarbonate Acrylic.](https://i.ytimg.com/vi/egF9qngK7-k/default.jpg)
![How to make a DIY fretless electric bass guitar](https://i.ytimg.com/vi/8GFl9VNDrcc/default.jpg)
![How To Play A Country Style Blues on Bass: The Root - 5th Pattern from "Call Me The Breeze"](https://i.ytimg.com/vi/W6lrVzgjCvc/default.jpg)
![How not to play Country Bass Guitar - Andy Irvine](https://i.ytimg.com/vi/Ig44XGQRxXI/default.jpg)
![1960 Fender Jazz Bass Stack Knob Restoration Retrospective Re-fret & Pickup Rewinds Mark Grant](https://i.ytimg.com/vi/A7QWibAZ6Qw/default.jpg)
![Building an Upright Bass by Hand (Part 1)](https://i.ytimg.com/vi/QBlRuWNFRtM/default.jpg)
![Making a Meyer Double Bass: Chapter 1 "THE FORM"](https://i.ytimg.com/vi/MA7ysMMehBI/default.jpg)
![Fretless Bass Prototype. One Piece Top (Bridge, Fingerboard & All)](https://i.ytimg.com/vi/YXGZt4H57Xg/default.jpg)
![Master THE NUMBERS SYSTEM (in under 10 minutes!)](https://i.ytimg.com/vi/Ib8vGsLC6WE/default.jpg)
![I Built a Cardboard Box Upright Bass - BOGDON BASS](https://i.ytimg.com/vi/t3VyUslweO8/default.jpg)
![Adjustable Bridge Making for Upright Bass](https://i.ytimg.com/vi/NR5JP2TEYBU/default.jpg)
![1977 Fender Jazz Bass full restoration](https://i.ytimg.com/vi/MoVAGS3Nhtc/default.jpg)