Attempt at stacking Gridfinity baseplates PART2 on the 3d printer
Link Here: https://www.printables.com/model/796781-gridfinity-baseplate-stack-4-high-for-bambu-with-a
Per the printables page:
Load the .3mf in Bambu Studio. Set flushing volumes to 800 both ways. Set flow for the interface material at 105%
I used PETG and PLA Plus
Note the modifier layer on either side of the middle most layers, this is to force the creation of top and bottom layers of the base grid, otherwise the slicer will treat the intermediate layer as just a modifier with infill the whole way through.
I also included the base model that I split in creation of the .3mf
Видео Attempt at stacking Gridfinity baseplates PART2 on the 3d printer канала Joe Malovich
Per the printables page:
Load the .3mf in Bambu Studio. Set flushing volumes to 800 both ways. Set flow for the interface material at 105%
I used PETG and PLA Plus
Note the modifier layer on either side of the middle most layers, this is to force the creation of top and bottom layers of the base grid, otherwise the slicer will treat the intermediate layer as just a modifier with infill the whole way through.
I also included the base model that I split in creation of the .3mf
Видео Attempt at stacking Gridfinity baseplates PART2 on the 3d printer канала Joe Malovich
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Pretty Good House P8, Waterline InstallationPretty Good House P2, Construction Slideshowwhat to do with this old sugar shack?Reinvesting In My Channel (New Camera Quick Overview)Canning Tomatoes, My Family MethodWorkshop Knobs On The CNCDenailer, Put on your safety squints.pool fill rough grade completeDenford Sherline CNC Arduino Upgrade Part 1Welder Stuck Hex Bit ExtractionA Custom Case I 3D Printed for my Thermal Camera (Old Video)A Man Outstanding In His FieldBear prints on the back porch.PGH 13, Rambling on about my wiring checklist and assorted other stuffs.Shop Progress 10 - Begin Framing The East Wall.What My Basement Has Been Up To [3d printers, YouTube, theater]A Walk Around My New PondLow Head Impellers Before I Ship Them.Stihl FS90R Weedwacker First Start Of The Year, How Many Pulls?Can 3D-Printed Plasma Cutting Templates Work?PGH 17, Wiring Map