CHOPPING UP THE BMW E30 FOR THE FIRST TIME | BMW E30 325i Touring Engine Bay Clean Up Ep 3

Install Raid for Free ✅ IOS: http://bit.ly/2KmI4xy ✅ ANDROID: http://bit.ly/2qiTs6H Start with💰50K silver and get a Free Epic Champion 💥 on day 7 of “New Player Rewards”

In this episode, I had the daunting task of removing the first panel I have ever removed from a car. It just so happened to be the BMW E30 Touring. One of the engines covering plates was rusted through in some places so I wanted to replace it completely. This was also a good practice for the BMW E30 325i Sport bodywork series I'll be starting shorting on this channel. Also in this episode, I bend a new brake pipe and get the engine ready to be reinstalled.

Next episode I'll prepare the area for the new panel and weld it in. I'll also install the transmission onto the engine ready for it to be installed.

Thanks for watching. Subscribe with the bell on to see how I get on welding in a new panel.

#BMW #E30touring #Projectcar

Thanks to FCP Euro for supplying parts for this restoration and supporting the channel. Get a lifetime guarantee on all parts here - https://hubs.ly/H0kPPZW0

Get a Shop Manual for Your Car: http://shrsl.com/1rdef
(Available for Most Makes and Models)

#Engine #BMWE30 #Restoration

Tools & equipment used:

Quartz Lacquer - https://goo.gl/8PTVKM
Base Coat Paint - https://goo.gl/mWhufG
Rust Remover - https://goo.gl/13gopW
Fast Mover 1kW Infrared Paint Dryer, Stand, Timer - https://bit.ly/2WYR9jJ
Workbenches - https://arborgardensolutions.co.uk
Moldex Full Face Mask - https://goo.gl/NNYGrv
FGL 5 Spray gun - https://goo.gl/Acg5rd
A.N.I. R150-T Mini Spray gun - https://goo.gl/cHTJS2
Colad Washable Overalls - https://goo.gl/3Css9E
Colad Mixing Cups - https://goo.gl/8DYmE8
Colad TurboMix Sticks - https://goo.gl/cYZfks
Colad Synthetic Paint Strainers - https://goo.gl/H79ZgL
Steel wire bits - http://geni.us/keyaD
Blasting Cabinet - https://bit.ly/2GxvKJ7
Blasting pot - https://bit.ly/32TMnrU
Cordless Ratchet - https://bit.ly/30YNlkG
Parts Wahser - https://bit.ly/2K5G9wA
Rotary Tool - http://geni.us/HGed
Concentrate Degreaser - http://geni.us/yUn9
Mannesmann Socket Set - http://geni.us/HCDZ

Time Stamps:

00:00 – Introduction
00:20 – Starting the bumper removal
00:40 – Getting the first bolt loose
01:06 – Drilling the second bolt from underneath
01:15 – Trying to tap a metal chisel in to twist it out
01:35 – Die grinding the head off
01:44 – Finally getting the head off
01:51 – Video sponsor Raid Shadow Legends
03:00 – Removing the front bumper front trim
03:08 – Drilling the bottom of the bolt out
03:52 – Twisting the bumper piece off
04:08 – The rusty bracket I was fighting for two days
04:14 – Front bumper shock
04:24 – Removing all of the small bolts on the front bumper
04:52 – Cutting a flat head into seized screws
05:55 – Finally removing the bumper
06:12 – The rusty bumper off the car
06:16 – Removing the seam sealant from the part I am cutting out
06:38 – Drilling out the spot welds
07:05 – Locating the spot welds
07:54 – Starting to split the metal apart
09:31 – Removing undercoating to get to the spot welds
10:05 – Grinding away at a lap weld
10:25 – Removing the panel (Engine covering plate right)
11:00 – The car without the part
11:15 – Brand new parts from FCPEURO.COM with a lifetime guarantee
11:37 – Bending the brake line for the second time
12:14 – Installing the new brake line
12:48 – Fitting many parts to the engine in preparation for installation
14:01 – Removing the pilot bearing
14:42 – Installing the new pilot bearing
15:04 – Installing the flywheel
15:28 – Installing the clutch
15:31 – Installing the pressure plate
15:51 – Bending a bracket on the transmission
16:20 – Changing the clutch release bearing
16:25 – Next episode, thanks for watching

If you would like to send me something to restore, tools to use or anything to support Restore It, please email:

Restoreitchannel@gmail.com

I'm doing YouTube full time, 7 days a week, so any support is appreciated.

A huge thank you to all of my Patrons. Exclusive content coming soon!

Become a patron to win the Items featured in these videos!
Patreon - https://www.patreon.com/RestoreIt

Follow me on Social media to keep up to date with videos and behind the scenes.

Twitter
https://twitter.com/Restore__It

Facebook
https://www.facebook.com/RestoreItCha...

Instagram
@RestoreItChannel

Discord
I now also have a discord server if you want to chill with like-minded people and maybe learn something new.

https://discord.gg/vNmCBk9

Видео CHOPPING UP THE BMW E30 FOR THE FIRST TIME | BMW E30 325i Touring Engine Bay Clean Up Ep 3 канала Restore It