Ford Focus Electric (how to glue the nameplates)

On a Ford Focus electric, the front door was replaced and I will show you how to glue the nameplates on it. The nameplate on the car emphasizes the personality of the car. For gluing you will need fishing line or strong kapron thread, construction or regular hair dryer, antisilicone degreaser.
Car manufacturers stick the emblem on the sticker on the double-sided adhesive tape. On older cars you can see these letters and numbers screwed on or sitting on special hooks. For gluing you will need a fishing line or strong kapron thread, construction or usual hair dryer and antisilicone- degreaser. The process is as follows: the plate is processed with a hair dryer - you have to heat it for 15-20 seconds. The fishing line is wrapped around the index fingers or holders. The thread is tucked behind the nameplate, pulling under all the letters with a sawing motion. If the car logo has not come off completely, just pick it up and tear it off with your fingers, and it will come off. Glue remains in place. It is scraped off with a spatula using anti-silicone. Also helps and rubber wheel, which scrapes away the remains of the tape without damaging the paint coating. It is usually mounted on a drill. Instead of antisilicone, you can use white spirit, bitumen remover or other special compositions.
To glue the nameplate back on the car, you need to remove the remnants of the double-sided adhesive tape. A razor blade, wrapped with masking tape or duct tape will help. The remnants of the adhesive layer on the logo are picked up and slowly scraped off. Sometimes you need to make several passes. If the tool is blunt, you will need to replace it.
After the body painting is done, it is time to glue the emblem back on the car. It is easier to work with double-sided adhesive tape: the wide one will help you to glue the emblem on the whole car; the narrow one will need to cut it into small segments, fasten it on the plate, and then glue the emblem on the car.
When you have chosen a wide scotch, before you glue the emblem on the car on a permanent place, the contour is cut off the excess. Next, you can begin the basic work. The process is intuitive and begins with placing tape with markings on the body, so that you will not need to re-glue if the place turns out to be chosen incorrectly. Having established a marking for themselves, remove the protective layer. You only have to glue the nameplate on the car, following the marks on the masking tape.
In some cases, the logo is a single unit, in others - individual letters. For the last option, in order to glue the nameplate on the car exactly in place, it is recommended to start with the outer letters, located on the right and left. When they are in place, it is easier to place the rest of the elements. You do not need to hurry, otherwise it is easy to make a mistake and install the letters unevenly. You can place a ruler on the hood, fixing it securely to back it up.
▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰
Sections of the video (chapters):
0:00 There is no nameplate on the car's right door
0:20 How to remove the nameplate
0:35 Cleaning the nameplate
1:08 Putting tape on the nameplate of the car
2:34 Sticker nameplate on the car
5:00 Cleaning the nameplate from the remnants of adhesive tape
▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰
And in this video you will see How to hang a TV on the wall https://youtu.be/P8zYRGQlSGQ
▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰
Subscribe to our "Adult & Kids" channel and watch videos on this topic #car #cars #vehicle #ford #automobile #automotive #toyota #autos #drive #truck #vehicles #jeep #automobiles #fordfocuselectric.
▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰
Our social media channel links:
Facebook - https://www.facebook.com/groups/3410409845895857/

Видео Ford Focus Electric (how to glue the nameplates) канала Взрослые и дети