TopXGun T1 Test Flights in Diatone White Sheep with Aimdroix Arms

I still consider myself a newbie when it comes to multirotors but I've built, configured and flown over a dozen frames with APM, Naza and Tarot; including a VTOL QuadPlane with a Pixhawk. I retrofitted the T1 in a Diatone White Sheep frame that had a Naza Lite flashed to v2. There's still a lot more tweaking that needs to be done. The lack of detailed instruction or description on setting up the gains makes this a very slow process. When you're normally used to having six areas of gains to adjust and your relegated to just half that, it leaves one wondering.

In due fairness, the T1 was developed as an agricultural crop spaying flight controller. Maybe, my expectations and making it perform as an aerial photography platform may be too much. Nevertheless, I always setup flight controllers with that mindset with the hopes of efficient and smooth performance with whatever utilization it would be meant for. This is a compilation of six flight tests; making changes to the Sens settings to get it to fly how I normally like multirotors to respond. All flights were done in LOS (Line of Sight) though I had telemetry being sent to the Ground Control Station software via the optional 900M Data Link.

Build specs:

Diatone White Sheep
Aimdroix Aluminum Arms565 mm MTM
ZTW Black Widow 3510 - 770 kV
Tarot CF 15 x 5.5 Props
4S 6600 mAh LiPo
DIY 2D GimbalRunCam2 HD
AUW: 2114g (4.66 lbs.)

Видео TopXGun T1 Test Flights in Diatone White Sheep with Aimdroix Arms канала Flip on Tech