Mini Lathe Spindle Lock Upgrade
G'day everyone,
it has been quite a few months since I have made any large modifications to the mini lathe. The 20 or so that I did last years have been working well and have been very useful. One that I have been meaning to do for quite some time is a spindle lock. A lathe spindle lock would be very helpful when cutting threats with a tap and die, since the spindle needs locked in place.
With this lathe there is very little room, and grabbing on to the chuck can be difficult at times, especially after I have been cutting with a coolant or cutting oil.
There are many designs of spindle lock, but the one that I am going with will be a simple ring that clamps on to the spindle to lock it. The ring will be attached to a mounting bracket which I will also make, and that bracket will bolt on to the head stock.
The best way to do this would be to use a CNC router or a CNC mill, but since I don't have an appropriately sized one, I will be doing this using the mill and lathe.
I hope you enjoy the video
#minilathe #machining #DIY
Mini lathe spindle lock
Mini Lathe - Sieg C3 7x14 Mini Metal Lathe
Milling Machine - Sieg X2.7l
Timestamps
0:00 - Introduction
0:35 - The Design
1:10 - Cutting And Boring The hole
3:11 - Squaring The Stock
3:32 - Facing The Part
4:16 - Cutting The Ring profile
5:21 - Making The Thread Attachment
6:02 - Brazing The Aluminium Parts
7:07 - Cutting The Slot
7:52 - Making The Mounting Bracket
9:35 - Final Assembly And Testing It
Видео Mini Lathe Spindle Lock Upgrade канала Artisan Makes
it has been quite a few months since I have made any large modifications to the mini lathe. The 20 or so that I did last years have been working well and have been very useful. One that I have been meaning to do for quite some time is a spindle lock. A lathe spindle lock would be very helpful when cutting threats with a tap and die, since the spindle needs locked in place.
With this lathe there is very little room, and grabbing on to the chuck can be difficult at times, especially after I have been cutting with a coolant or cutting oil.
There are many designs of spindle lock, but the one that I am going with will be a simple ring that clamps on to the spindle to lock it. The ring will be attached to a mounting bracket which I will also make, and that bracket will bolt on to the head stock.
The best way to do this would be to use a CNC router or a CNC mill, but since I don't have an appropriately sized one, I will be doing this using the mill and lathe.
I hope you enjoy the video
#minilathe #machining #DIY
Mini lathe spindle lock
Mini Lathe - Sieg C3 7x14 Mini Metal Lathe
Milling Machine - Sieg X2.7l
Timestamps
0:00 - Introduction
0:35 - The Design
1:10 - Cutting And Boring The hole
3:11 - Squaring The Stock
3:32 - Facing The Part
4:16 - Cutting The Ring profile
5:21 - Making The Thread Attachment
6:02 - Brazing The Aluminium Parts
7:07 - Cutting The Slot
7:52 - Making The Mounting Bracket
9:35 - Final Assembly And Testing It
Видео Mini Lathe Spindle Lock Upgrade канала Artisan Makes
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![20 Best Mini Lathe Upgrades And Improvements](https://i.ytimg.com/vi/YVkWQLbPo60/default.jpg)
![DIY Spindle Lock for a 3-in-1 Mill Lathe Combo, Basic Design and Fitment to the Lathe](https://i.ytimg.com/vi/sqdLFZqdh7Q/default.jpg)
![Mini Lathe Carriage Lock - Essential Upgrade](https://i.ytimg.com/vi/5HeDkOR1fFU/default.jpg)
![Mini lathe spindle indexer](https://i.ytimg.com/vi/xuot6xSHCGM/default.jpg)
![My BEST Chinese lathe UPGRADE](https://i.ytimg.com/vi/goCNyyNcB80/default.jpg)
![](https://i.ytimg.com/vi/jXu_Lygp2U0/default.jpg)
![Mini Mill Spindle Lock](https://i.ytimg.com/vi/5aS0j3uyU9g/default.jpg)
![CNC Dividing Head Conversion DIY! (Part 1) - Mounting Bracket](https://i.ytimg.com/vi/NhHMF17VY4s/default.jpg)
![Should You Buy A Cheap Mini Milling Machine? (Sieg X2.7L In-depth Review)](https://i.ytimg.com/vi/R_qJX9e-jIU/default.jpg)
![Lathe Cross Slide Rebuild | Machining A New Lathe Cross Slide With T-Slots](https://i.ytimg.com/vi/wg_HX-LiwK8/default.jpg)
![Mini Lathe Headstock Rigidity Upgrade](https://i.ytimg.com/vi/XTydA947xYs/default.jpg)
![#MT15 - Making a Compound Slide Lock for my Sieg SC3 mini lathe. By Andrew Whale.](https://i.ytimg.com/vi/2CEy6TvkU9c/default.jpg)
![Lathe Tailstock Fine Feed Upgrade](https://i.ytimg.com/vi/TeFzxtl1rbE/default.jpg)
![Mini Lathe Chuck Runout](https://i.ytimg.com/vi/KWuk8DpIyQs/default.jpg)
![Grinding HSS Lathe Tools | Beginner Tutorial](https://i.ytimg.com/vi/IxZpIxryUUg/default.jpg)
![Mini Lathe Cross Slide Improvements](https://i.ytimg.com/vi/lNznefS02lE/default.jpg)
![Mini Lathe Upgrade: Oil Lubricated Headstock](https://i.ytimg.com/vi/Bt06J0KUUpI/default.jpg)
![Mini Lathe Heavy Machining In Steel - It Can Be Done](https://i.ytimg.com/vi/osJbTciqC5Q/default.jpg)
![The Infamous Mini Lathe!](https://i.ytimg.com/vi/05vUCdzhoe4/default.jpg)
![Making A Fly Cutter For The Milling Machine | Heat Treatment And Tool holder](https://i.ytimg.com/vi/XZiJbJ_R2uk/default.jpg)