Grinding HSS Lathe Tools | Beginner Tutorial
Cutting Tool Geometry Chart: https://0.academia-photos.com/attachment_thumbnails/32909017/mini_magick20190408-4455-1mee3zv.png?1554730372
G'day everyone,
I've recently bought some new HSS tool blanks for the lathe. My intention is to grind them into lathe tools for various types of cuts and materials. Since I was already going to grind the tools, I thought it might be useful to film the process of how I decide how to grind the tools for different types of turning operations and materials.
In this video I will go over some basic tool geometries (rake angles and clearance angles) and tool shapes that I have ground over the past 6 years. This video is intended as a beginning introduction to tool grinding and will allow beginners to understand the reasons why tools are shaped the way they are. I will be using by bench grinder to grind the tools into shape.
I hope you enjoy the video, cheers.
Timestamps
Intro - 0:00
High Speed Steel - 1:03
Grinding A Brass Tool - 3:27
Grinding A Positive Rake Tool - 8:02
Aluminum Chip Breaker - 10:25
Steel Chip Breaker - 11:41
Back Rake Angle - 13:01
Right Hand Tool - 14:08
Left Hand Tool - 15:34
Form Tool - 16:10
Boring Bars - 17:30
Lathe: Sieg c3 7x14 mini lathe
Mill: Sieg x2.7l
#machining #DIY #lathe
Видео Grinding HSS Lathe Tools | Beginner Tutorial канала Artisan Makes
G'day everyone,
I've recently bought some new HSS tool blanks for the lathe. My intention is to grind them into lathe tools for various types of cuts and materials. Since I was already going to grind the tools, I thought it might be useful to film the process of how I decide how to grind the tools for different types of turning operations and materials.
In this video I will go over some basic tool geometries (rake angles and clearance angles) and tool shapes that I have ground over the past 6 years. This video is intended as a beginning introduction to tool grinding and will allow beginners to understand the reasons why tools are shaped the way they are. I will be using by bench grinder to grind the tools into shape.
I hope you enjoy the video, cheers.
Timestamps
Intro - 0:00
High Speed Steel - 1:03
Grinding A Brass Tool - 3:27
Grinding A Positive Rake Tool - 8:02
Aluminum Chip Breaker - 10:25
Steel Chip Breaker - 11:41
Back Rake Angle - 13:01
Right Hand Tool - 14:08
Left Hand Tool - 15:34
Form Tool - 16:10
Boring Bars - 17:30
Lathe: Sieg c3 7x14 mini lathe
Mill: Sieg x2.7l
#machining #DIY #lathe
Видео Grinding HSS Lathe Tools | Beginner Tutorial канала Artisan Makes
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![Making A Fly Press For The Workshop | Part Two - The Frame](https://i.ytimg.com/vi/bmkocmXei9U/default.jpg)
![Making A Fly Press For The Workshop | Part One](https://i.ytimg.com/vi/I2OPgacXKtk/default.jpg)
![The 6 Best Lathe Projects For Beginners](https://i.ytimg.com/vi/ZkPde5gQYfE/default.jpg)
![Making A TAP Follower - Should Have Made It a long Time Ago](https://i.ytimg.com/vi/XBov53ntj2Q/default.jpg)
![Installing A DRO on my New Lathe (Digital Readout)](https://i.ytimg.com/vi/Y3C06jAEH1M/default.jpg)
![I Had To Make a MASSIVE Tap Wrench. It's 270cm Long](https://i.ytimg.com/vi/hzAkomtuxOY/default.jpg)
![I Had To Make a HUGE 40mm Thread Tap - Its BIG](https://i.ytimg.com/vi/dFwsMQxQ140/default.jpg)
![Making A Wedge Lock Quick Change Tool Post For The New Lathe](https://i.ytimg.com/vi/RKqea7daKBA/default.jpg)
![I Need a Custom Thread Tap - Shop Made Tap](https://i.ytimg.com/vi/6qXinc7Ob5I/default.jpg)
![Making A BIG 200mm Fly Cutter For The Milling Machine](https://i.ytimg.com/vi/SGwVWd9yRno/default.jpg)
![Making a BIG Set of V Blocks for the Milling Machine | Vise Jaws](https://i.ytimg.com/vi/AAGSsUpYdLo/default.jpg)
![Making a 2 Piece Vise For The Milling Machine](https://i.ytimg.com/vi/lPaWWocHGM8/default.jpg)
![I Filled My Milling Machine With Lead, Cast Iron and Epoxy Granite. Here Is Why](https://i.ytimg.com/vi/O4pbd7wdXyY/default.jpg)
![I Put A 3HP Motor On My Mini Mill](https://i.ytimg.com/vi/68wprB7jqgY/default.jpg)
![The New Lathe Has Some Issues, But I Can Fix Them](https://i.ytimg.com/vi/YKiJMqJnY8Y/default.jpg)
![I Finally Bought A New Lathe - Hafco Al 250G](https://i.ytimg.com/vi/euxa3Iqq4OA/default.jpg)
![The $600 Mini Lathe - 4 Years later](https://i.ytimg.com/vi/UdwiEx8psrw/default.jpg)
![Helical Milling Attachment For The Milling Machine](https://i.ytimg.com/vi/AJBVUpBHdmA/default.jpg)
![Drilling Hardened Steel With Masonry Bits - Not A Lifehack](https://i.ytimg.com/vi/burt-941AXQ/default.jpg)
![Mist Coolant For The Mini Lathe](https://i.ytimg.com/vi/g-gF4CijbS4/default.jpg)
![The 3HP Mini Lathe..... It Scares Me](https://i.ytimg.com/vi/dg2kbCU9X_s/default.jpg)