Should You Buy A Cheap Mini Milling Machine? (Sieg X2.7L In-depth Review)
G'day everyone,
Today I am going to be giving my thoughts on my Mini Mill that I have been using for almost half a year now. I bought it near the end of May 2021 and I have used it almost every day, making many little projects and lathe upgrades, many I have shared here on he channel.
Having used long enough, I now feel comfortable sharing my experience with this mini milling machine. Ill go through its specs, capabilities and quirks, as well as the pros and cons that I have run into. I will also try and give an assessment to the question, is an import mill like this worth it. I will also try and compare this mill to the more popular, but smaller Sieg X2 and SX2 variants, and detail why I chose this mill over those.
They are a large investment and still run the risk of quality issues. I hope you find this video useful.
Cheers.
Mill: Sieg X2.7L
Lathe : Sieg C3 7x14 Mini lathe
#mill #millingmachine #minimill
Timestamps
0:00 - Introduction
0:49 - Why I Bought A Mill
1:35 - Dimensions and Work Area
4:33 - Costs
5:53 - What You Get With The Mill
9:04 - Quality And Quality Issues
11:56 - Spindle, Morse Taper And Drawbar
15:10 - Quill And DRO
17:07 - Motor And Spindle Belt Drive
17:53 - Solid And Tilting Column
18:50 - Control Panel
19:34 - Mill Table And T - Slots
21:58 - Dial, Handwheel And Leadscrew
24:32 - Way Cover
25:00 - Table Drainage Port
25:23 - Milling Performance
27:28 - Was It Worth It? - Conclusion
Видео Should You Buy A Cheap Mini Milling Machine? (Sieg X2.7L In-depth Review) канала Artisan Makes
Today I am going to be giving my thoughts on my Mini Mill that I have been using for almost half a year now. I bought it near the end of May 2021 and I have used it almost every day, making many little projects and lathe upgrades, many I have shared here on he channel.
Having used long enough, I now feel comfortable sharing my experience with this mini milling machine. Ill go through its specs, capabilities and quirks, as well as the pros and cons that I have run into. I will also try and give an assessment to the question, is an import mill like this worth it. I will also try and compare this mill to the more popular, but smaller Sieg X2 and SX2 variants, and detail why I chose this mill over those.
They are a large investment and still run the risk of quality issues. I hope you find this video useful.
Cheers.
Mill: Sieg X2.7L
Lathe : Sieg C3 7x14 Mini lathe
#mill #millingmachine #minimill
Timestamps
0:00 - Introduction
0:49 - Why I Bought A Mill
1:35 - Dimensions and Work Area
4:33 - Costs
5:53 - What You Get With The Mill
9:04 - Quality And Quality Issues
11:56 - Spindle, Morse Taper And Drawbar
15:10 - Quill And DRO
17:07 - Motor And Spindle Belt Drive
17:53 - Solid And Tilting Column
18:50 - Control Panel
19:34 - Mill Table And T - Slots
21:58 - Dial, Handwheel And Leadscrew
24:32 - Way Cover
25:00 - Table Drainage Port
25:23 - Milling Performance
27:28 - Was It Worth It? - Conclusion
Видео Should You Buy A Cheap Mini Milling Machine? (Sieg X2.7L In-depth Review) канала Artisan Makes
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Making A TAP Follower - Should Have Made It a long Time AgoInstalling A DRO on my New Lathe (Digital Readout)I Had To Make a MASSIVE Tap Wrench. It's 270cm LongI Had To Make a HUGE 40mm Thread Tap - Its BIGMaking A Wedge Lock Quick Change Tool Post For The New LatheI Need a Custom Thread Tap - Shop Made TapMaking A BIG 200mm Fly Cutter For The Milling MachineMaking a BIG Set of V Blocks for the Milling Machine | Vise JawsMaking a 2 Piece Vise For The Milling MachineI Filled My Milling Machine With Lead, Cast Iron and Epoxy Granite. Here Is WhyI Put A 3HP Motor On My Mini MillThe New Lathe Has Some Issues, But I Can Fix ThemI Finally Bought A New Lathe - Hafco Al 250GThe $600 Mini Lathe - 4 Years laterHelical Milling Attachment For The Milling MachineDrilling Hardened Steel With Masonry Bits - Not A LifehackMist Coolant For The Mini LatheThe 3HP Mini Lathe..... It Scares MeMini Lathe 3HP Motor Upgrade..... (Yep 3HP)Making A Vice Stop For The Milling Machine ViceI Bought A TIG W̶e̶l̶d̶e̶r̶ Torch - TIG Stand Build