Shaping Wooden Climbing Holds - Sloper #1

In this video, I want to share my process of how I make a wooden sloper for my 42° overhanging board.
The following tools were used:
- Band saw
- Belt sander (60 grit)
- Drill with 20mm Forstner drill bit, 20.5mm 90° countersink drill bit, 11mm drill bit
- Veritas Carver's Vise in combination with the 2" mounting plate
- Arbortech Mini Grinder with the Mini Turbo disc
- Angle grinder with the following carbide disc:
- King Arthur's Tools Holey Galahad Flat Medium
- Drill with a sanding pad (60 grit)
- Drill with 5mm countersink drill bit
- Detail sander (60 grit)
- Sandpaper (80 grit)

Видео Shaping Wooden Climbing Holds - Sloper #1 канала Tobias Wurft