Casting a 2 Part Mold for Hollowbacked Holds
Things begin to get complicated here. As you start casting larger holds, it's important to keep the resin amounts as low as possible for cost savings, and the only way to do that is two part molds. Or steal your resin. This is the legal option.
Use “JDClimb10” on the Alumilite website for 10% off any Alumilite product.
Alumilite RC-3 Tan: https://www.alumilite.com/resins/alumires-rc-3-tan/?aff=35
Alumilite High Strength 3 Silicone: https://www.alumilite.com/silicones/high-strength-3/?aff=35
Smooth-On Smooth Cast 320: https://www.smooth-on.com/products/smooth-cast-320/
Smooth-On Mold Max 20 Silicone: https://www.smooth-on.com/products/mold-max-20/
Видео Casting a 2 Part Mold for Hollowbacked Holds канала JD Haigler
Use “JDClimb10” on the Alumilite website for 10% off any Alumilite product.
Alumilite RC-3 Tan: https://www.alumilite.com/resins/alumires-rc-3-tan/?aff=35
Alumilite High Strength 3 Silicone: https://www.alumilite.com/silicones/high-strength-3/?aff=35
Smooth-On Smooth Cast 320: https://www.smooth-on.com/products/smooth-cast-320/
Smooth-On Mold Max 20 Silicone: https://www.smooth-on.com/products/mold-max-20/
Видео Casting a 2 Part Mold for Hollowbacked Holds канала JD Haigler
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Casting a Jacket or Brush-On MoldResin Cost Efficiency - Using FillerCome fare prese in resina per l'arrampicata sportivaThe Shaping Series - Kilter - Episode 1Make recycled plastic wall grips with aluminum casted moulds #preciousplasticBuilding Volumes out of Scrap PlywoodWaïWaï Vlog#2 - Fabrication de volumes d'escalade !Making Rock Climbing Holds at Escape Climbing 2012Concrete Casting: Moldmaking for a Concrete Sink18+1 Tips how to make Mold and Casting from Resin 3D Prints | Platinum vs Tin cure siliconeMaking Climbing VolumesSilicone Mold Making: When To Use A Two-Piece Mold. Part 1Shaping Granite and TheoryLets Make - A Climbing Wall Volume2-Part Silicone Mold using Mold Star™ 16 FASTMoulage en 2 parties d'un bol - 2 Part Molding Of A BowlLearning to hollow cast | Bronze GrizzlyMaking a cheap silicone mould for climbing holdsHow to make professional climbing holds - DIY tutorial with the list of materialsLET'S CAST UP SOME ZOMBIES USING SMOOTH-CAST 320!!!