Tarot FY680 Build - Setup - eRC
***
Coupon Code: DEANFY680SDJIUY582
Discount (3,5 %) on:
Tarot FY680 Frame: http://www.foxtechfpv.com/tarot-fy680-cf-folding-hexacopter-p-810.html
1255 Supreme Lite Propellers: http://www.foxtechfpv.com/foxtech-supreme-lite-cf-propeller12x55-p-1384.html
Foxtech 40A OPTO ESCs: http://www.foxtechfpv.com/foxtech-multipal-40a-opto-escsimonk-firmware-p-1587.html
Foxtech S2216 800 KV Motors: http://www.foxtechfpv.com/foxtech-motor-s2216-kv800-p-1469.html
***
In the third video in this hexacopter build series we are going to talk about programming and setting parameters for NAZA V2 flight controller, Futaba T14SG transmitter, ESCs, as well as make last touches to make the copter ready for maiden flight.
We will also cover basic procedures in multi-rotor building like ESC throttle calibration, stick calibration, model setup, motor reversing etc.
WARNING:
Do not install propellers until you finish all the steps shown in this video. Propellers should always be installed at the end!
Link to NAZA V2 Assistant Software:
http://www.dji.com/product/naza-m-v2/download
Hexacopter weight:
1.865 g
You need:
Futaba T14SG Transmitter:
http://www.foxtechfpv.com/futaba-14sg-mode-ii-p-1176.html
Foxtech Supreme Lite CF Propellers 12x5,5:
http://www.foxtechfpv.com/foxtech-supreme-lite-cf-propeller12x55-p-1384.html
Accessories:
4S Battery
3S Battery
Tools:
2.0 Hex Screwdriver
Threadlocker
Additional Information:
Video: Canon 600D/T3i - 18-55 mm Lens
Editing: FinalCut Pro X
Music: GarageBand
Видео Tarot FY680 Build - Setup - eRC канала eluminerRC
Coupon Code: DEANFY680SDJIUY582
Discount (3,5 %) on:
Tarot FY680 Frame: http://www.foxtechfpv.com/tarot-fy680-cf-folding-hexacopter-p-810.html
1255 Supreme Lite Propellers: http://www.foxtechfpv.com/foxtech-supreme-lite-cf-propeller12x55-p-1384.html
Foxtech 40A OPTO ESCs: http://www.foxtechfpv.com/foxtech-multipal-40a-opto-escsimonk-firmware-p-1587.html
Foxtech S2216 800 KV Motors: http://www.foxtechfpv.com/foxtech-motor-s2216-kv800-p-1469.html
***
In the third video in this hexacopter build series we are going to talk about programming and setting parameters for NAZA V2 flight controller, Futaba T14SG transmitter, ESCs, as well as make last touches to make the copter ready for maiden flight.
We will also cover basic procedures in multi-rotor building like ESC throttle calibration, stick calibration, model setup, motor reversing etc.
WARNING:
Do not install propellers until you finish all the steps shown in this video. Propellers should always be installed at the end!
Link to NAZA V2 Assistant Software:
http://www.dji.com/product/naza-m-v2/download
Hexacopter weight:
1.865 g
You need:
Futaba T14SG Transmitter:
http://www.foxtechfpv.com/futaba-14sg-mode-ii-p-1176.html
Foxtech Supreme Lite CF Propellers 12x5,5:
http://www.foxtechfpv.com/foxtech-supreme-lite-cf-propeller12x55-p-1384.html
Accessories:
4S Battery
3S Battery
Tools:
2.0 Hex Screwdriver
Threadlocker
Additional Information:
Video: Canon 600D/T3i - 18-55 mm Lens
Editing: FinalCut Pro X
Music: GarageBand
Видео Tarot FY680 Build - Setup - eRC канала eluminerRC
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
How to - Dyeing RC parts - eluminerRCRustler VXL PRO - "Eight" Run - eluminerRCIntro - eluminerRCHow to - KK2 0 tuning guide - eluminerRCTarot FY680 Build - Frame Assembly - eRCTricopter Build - Frame Assembly - eRCHow to - Simple propeller balancing - eluminerRCQuadcopter build - Final touches - eluminerRCeRC quad - Level 2 upgrade - Voltage displayHow to - KK2.0 firmware update - Mac - eluminerRCRustler VXL PRO - eluminerRCTarot FY680 Build - Flight Test - eRCQuadcopter build - KK2.0 initial setup - eluminerRCFoxtech Pivot V2S Landing Gear Review - eRCTarot FY680 Upgrade - Foxtech Retracts - eRCQuadcopter build - KK2.0 installation - eluminerRCTarot FY680 Upgrade - FPV with iOSD mini - eRCQuadcopter build - Frame build - eluminerRCHow to - KK2.0 firmware update - Windows - eluminerRCTarot FY680 Build - Electronics - eRCQuadcopter build - Soldering connector - eluminerRC