Dell PowerEdge R710 build PART 1/9 | fixes, bios and firmware updates, and factory reset
This is Part I of a series of videos showing how I build up a used PowerEdge R710 server for use as a FreeNAS or UNRAID server.
In Part I, I discover some problems with the hardware that required fixing. I then updated the BIOS and all firmwares. And finally, I will show you how to factory reset everything.
2:35 - Taking a look at the hardware
6:13 - First power on
8:08 - Replacing the dead iDRAC 6 Express module
14:35 - Discovering dead fan and replacing it
24:02 - Downloading all the updates
35:36 - Applying BIOS and firmware updates
46:35 - Factory reset of iDRAC 6 configuration
48:08 - Factory reset of BIOS settings NVRAM
50:18 - Configuring BIOS settings
52:33 - Final wrap up
For pre-flashed IT mode HBA cards, check out my eBay store at: https://ebay.to/33Gm8VN
eBay Partner Affiliate disclosure:
The eBay links in this video description are eBay partner affiliate links. By using these links to shop on eBay, you support my channel, at no additional cost to you. Even if you do not buy from the ART OF SERVER eBay store, any purchases you make on eBay via these links, will help support my channel. Please consider using them for your eBay shopping. Thank you for all your support! :-)
Видео Dell PowerEdge R710 build PART 1/9 | fixes, bios and firmware updates, and factory reset канала Art of Server
In Part I, I discover some problems with the hardware that required fixing. I then updated the BIOS and all firmwares. And finally, I will show you how to factory reset everything.
2:35 - Taking a look at the hardware
6:13 - First power on
8:08 - Replacing the dead iDRAC 6 Express module
14:35 - Discovering dead fan and replacing it
24:02 - Downloading all the updates
35:36 - Applying BIOS and firmware updates
46:35 - Factory reset of iDRAC 6 configuration
48:08 - Factory reset of BIOS settings NVRAM
50:18 - Configuring BIOS settings
52:33 - Final wrap up
For pre-flashed IT mode HBA cards, check out my eBay store at: https://ebay.to/33Gm8VN
eBay Partner Affiliate disclosure:
The eBay links in this video description are eBay partner affiliate links. By using these links to shop on eBay, you support my channel, at no additional cost to you. Even if you do not buy from the ART OF SERVER eBay store, any purchases you make on eBay via these links, will help support my channel. Please consider using them for your eBay shopping. Thank you for all your support! :-)
Видео Dell PowerEdge R710 build PART 1/9 | fixes, bios and firmware updates, and factory reset канала Art of Server
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Dell PowerEdge R710 build PART 2/9 | setting up storage subsystemDell PowerEdge R710 build PART 3/9 | CPU upgradeDell PowerEdge R710 build PART 4/9 | how to add a GPUDell PowerEdge R410 build PART 1 | iDRAC, BIOS, Firmware updates, and factory resetRackmount Server Anatomy 101 | A Beginner's GuideThe Server Rescue Story Ep 3 | Storage, firmware updates, & long nights with the Dell PowerEdge R820Dell PowerEdge R710 build PART 6/9 | 4 ways to install boot driveHow to update BIOS and firmware using Dell Lifecycle Controller | what to do when it doesn't workVirtualization Home Lab GuideDell PowerEdge R720 Dual Xeon Server ReviewHow to spot counterfeit server partsUpgrading the Dell PowerEdge R710Dell PowerEdge R710 - What You Need To KnowvShpere vs Proxmox on a PowerEdge R710?The Server Rescue Story Ep 1/3 | A Tale of 2 Servers (Dell PowerEdge R820 motherboard swap)ESXI 6.7 Install on the Dell R710 ServerDell PowerEdge R410 build PART 2 | storage controller options3 ways to identify if your R710 is Gen I or IIDell PowerEdge R410 build PART 3 | Upgrading the CPUs to Xeon L5640sAn Inside Look at The Art of Server Flashing Machines