How to...Move a washing machine with polish and string
Related videos on my channel:
Washing machine safety checks!
https://youtu.be/_9_fBJIR3Eg
How to... remove and re-seat washing machine door/drum seal.
https://youtu.be/l3KDqvOxemQ
This video:
'How to... Move a washing machine without damaging the pipes by using polish and string'
(Two great DIY tips in one video! )
First top tip;
Use a bit of furniture polish to lube the floor area where the washing machine or other heavy appliance usually sits on. Since most washing machines etc have rubberrised feet, and most kitchen floors will be tiled, wood or laminate wood, a small bit of furniture polish will enable one person to slide the unit back home. Don't go mad with it otherwise it might spread and make your floor slippery.
Second top tip;
If the area behind the washing machine is small and the pipes hoses are long and flop down, instead of ramming the machine back in and running the risk of crimping or trapping a hot or cold hose or even the mains cord, just hold the pipes vertical against the rear of the machine using a long piece of twine or cord looped around and held in your hand as you carefully slide and position the appliance back home. As soon as it's almost there, release one of the string ends and pull out the string thus leaving the pipes and power cable in roughly vertical position at the back and not wedged tight between the floor and the rear feet.
Видео How to...Move a washing machine with polish and string канала Random
Washing machine safety checks!
https://youtu.be/_9_fBJIR3Eg
How to... remove and re-seat washing machine door/drum seal.
https://youtu.be/l3KDqvOxemQ
This video:
'How to... Move a washing machine without damaging the pipes by using polish and string'
(Two great DIY tips in one video! )
First top tip;
Use a bit of furniture polish to lube the floor area where the washing machine or other heavy appliance usually sits on. Since most washing machines etc have rubberrised feet, and most kitchen floors will be tiled, wood or laminate wood, a small bit of furniture polish will enable one person to slide the unit back home. Don't go mad with it otherwise it might spread and make your floor slippery.
Second top tip;
If the area behind the washing machine is small and the pipes hoses are long and flop down, instead of ramming the machine back in and running the risk of crimping or trapping a hot or cold hose or even the mains cord, just hold the pipes vertical against the rear of the machine using a long piece of twine or cord looped around and held in your hand as you carefully slide and position the appliance back home. As soon as it's almost there, release one of the string ends and pull out the string thus leaving the pipes and power cable in roughly vertical position at the back and not wedged tight between the floor and the rear feet.
Видео How to...Move a washing machine with polish and string канала Random
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![More pond life examples - Tubifex & Dugesia polychroa](https://i.ytimg.com/vi/WwjC4ixGKK4/default.jpg)
![Investigating failure of a ZF4HP18 transmission. Part 5 - wear and tear](https://i.ytimg.com/vi/TFv7TG7R3jU/default.jpg)
![Part 34 ' Priming & painting'. (It didn't go well)](https://i.ytimg.com/vi/5bbYXnED-Sk/default.jpg)
![More woodlice](https://i.ytimg.com/vi/yAommUmL_Kw/default.jpg)
![Remove turbo Part 6](https://i.ytimg.com/vi/CefjsoxX-NA/default.jpg)
![Marsh Harrier at Fen Drayton Lakes](https://i.ytimg.com/vi/m0fC5G24iRw/default.jpg)
![15 minutes of pond underwater video (no audio)](https://i.ytimg.com/vi/bajnFZFZ9mE/default.jpg)
![The Bridge](https://i.ytimg.com/vi/Buq3xiumXRw/default.jpg)
![How to install compressor housing onto the CHRA 'cartridge'](https://i.ytimg.com/vi/0IOQLUCHh3A/default.jpg)
![Swans on the Great Ouse](https://i.ytimg.com/vi/y_P2_PqirdU/default.jpg)
![Vlog part 1](https://i.ytimg.com/vi/B7ntyDiYsH8/default.jpg)
![The X-Trail Files # 12 'Whats in my car-toolkit'](https://i.ytimg.com/vi/cDm3xV7mzIs/default.jpg)
![Floating shell](https://i.ytimg.com/vi/Iobwyv7ZquE/default.jpg)
![Part 28 'Cutting out more rust from the sill'](https://i.ytimg.com/vi/XwD1pa4ePWc/default.jpg)
![The X-Trail Files # Part 35 'How to remove glovebox lock'](https://i.ytimg.com/vi/JUTQflgUBtk/default.jpg)
![Push forming body panels for miniatures - Part 1](https://i.ytimg.com/vi/EGykboOB4BM/default.jpg)
![A little bit of calm](https://i.ytimg.com/vi/8of8WdMSW_0/default.jpg)
![Rover R8 216 GTi 16v - Part 6 'Welding woes & decision time'](https://i.ytimg.com/vi/8ORcK3uCZXg/default.jpg)
![Rover 216 GTI (R8) front suspension in use](https://i.ytimg.com/vi/7P4WqwzncTI/default.jpg)
![The X-Trail Files #16 'How wide is the T30 Xtrail?'](https://i.ytimg.com/vi/4F1gQgulXis/default.jpg)
![Crows cracking oyster shells at Arne beach, Dorset](https://i.ytimg.com/vi/J32OZzP-4os/default.jpg)