How to calibrate the pitch on a technics 1210 using a multimeter
If you want to help me with any of my projects I have setup https://www.paypal.com/paypalme/leelegionsmith
https://ko-fi.com/leelegionsmith
In this video I calibrate a Technics 1210 with a cheap multimeter using the frequency function. First disconnect the pitch board and set vr302 to 2.7K while the pitch lock is on. Then reconnect the pitch board and use the frequency function of the meter to measure TP27. Set Vr301 to 262.08 or as close as possible with your meter and that should be back to factory settings. Looking at the video while editing and I should have set 262.1 instead of 262.0 as this would be closer to the .08 needed.
I used the VICI VC99, but any multimeter that can measure frequency will work. Check out EEVblog for guides to multimeters.
https://www.youtube.com/watch?v=LCFEonQDkQU
Видео How to calibrate the pitch on a technics 1210 using a multimeter канала DJ legion
https://ko-fi.com/leelegionsmith
In this video I calibrate a Technics 1210 with a cheap multimeter using the frequency function. First disconnect the pitch board and set vr302 to 2.7K while the pitch lock is on. Then reconnect the pitch board and use the frequency function of the meter to measure TP27. Set Vr301 to 262.08 or as close as possible with your meter and that should be back to factory settings. Looking at the video while editing and I should have set 262.1 instead of 262.0 as this would be closer to the .08 needed.
I used the VICI VC99, but any multimeter that can measure frequency will work. Check out EEVblog for guides to multimeters.
https://www.youtube.com/watch?v=LCFEonQDkQU
Видео How to calibrate the pitch on a technics 1210 using a multimeter канала DJ legion
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![How to strip and clean a technics 1200 and 1210 Pitch slider.](https://i.ytimg.com/vi/td-zA_wGlJM/default.jpg)
![Technics SL MKII Pitch calibration part #1 how to calibrate 0 position.](https://i.ytimg.com/vi/L-NcdnCL41Y/default.jpg)
![How I replaced damaged bearings on a Technics 1200-1210 turntable.](https://i.ytimg.com/vi/SptRKbDNHvM/default.jpg)
![Perfect pitch calibration on a Mk2](https://i.ytimg.com/vi/RWE11v7KcQc/default.jpg)
![Technics SL MKII Pitch calibration part #2 How to calibrate the pitch range.](https://i.ytimg.com/vi/hCEf4CArTCk/default.jpg)
![Technics SL1210 / SL12100 running too fast, diagnosis and repair](https://i.ytimg.com/vi/icUL9hVnzMA/default.jpg)
![TECHNICS SL1200 SMD LED INSTALLATION GUIDE](https://i.ytimg.com/vi/5FNUq3_bWY4/default.jpg)
![Fixing a Technics SL-1200Mk2 (How To Unstick It)](https://i.ytimg.com/vi/ryJQ7UzVTGc/default.jpg)
![Technics SL-1200 Pitch Fader Click Removal & Service](https://i.ytimg.com/vi/Cs23TZAHP20/default.jpg)
![how to adjust the pitch range on a technics 1200/1210 MKII](https://i.ytimg.com/vi/5ywHNX58S1A/default.jpg)
![DMX/DX fader cleaning](https://i.ytimg.com/vi/vcRg90iZtM8/default.jpg)
![MAINTAINING A VINYL TURNTABLE HOW TO KEEP IT CLEAN AND WORKING IN TIP TOP CONDITION](https://i.ytimg.com/vi/O1qbNNkRDdk/default.jpg)
![Technics SL1210 MK2 Erratic or Unstable Pitch Fix](https://i.ytimg.com/vi/RPRcW74ay7w/default.jpg)
![Technics 1200 pitch decal removal & install.](https://i.ytimg.com/vi/elJ1pmKQbZc/default.jpg)
![Technics 1210 repair VLOG #1 - Pitch wobble problem that was a main board fault.](https://i.ytimg.com/vi/iI4J1MF1MlI/default.jpg)
![Testing Technics RCA leads - Are some Van Damme cables bad ?](https://i.ytimg.com/vi/7zj8p6JXPqw/default.jpg)
![Pitch calibration Technics 1200](https://i.ytimg.com/vi/JY75PY9YrUI/default.jpg)
![Cleaning And Calibrating The dirtiest Technique 1200 MK2](https://i.ytimg.com/vi/ROSvlMOIxfQ/default.jpg)
![Buying Technics SL-1200MK2 SL1200M5G Things to check when Buying technics Turntables Tone arm Check](https://i.ytimg.com/vi/JUa-ojJ9jxU/default.jpg)
![Segunda Parte, limpieza pitch](https://i.ytimg.com/vi/3ovUcWIirKE/default.jpg)