Technics SL MKII Pitch calibration part #1 how to calibrate 0 position.
WARNING ALWAYS DISCONNECT YOUR TURNTABLE FROM THE MAINS WHEN OPENING OR WORKING INSIDE THE TURNTABLE.
This is part one in a 2 part video showing you how to calibrate the pitch on a Technics SL MKII.
In this video I will show you how to calibrate the pitch 0 position, this should cure problems such as.
- two 0 positions on the pitch fader.
- Suddenly jolting out of 0 position.
- No 0 position at all.
If you have a different problem consult me before doing this as this may not sort your problem and it will be a waist of time.
There are some links below for some places you can get a multi meter.
Maplin electronics.
http://www.maplin.co.uk/Module.aspx?ModuleNo=37279
ebay.
http://cgi.ebay.co.uk/LCD-Digital-Voltmeter-Ammeter-Ohm-Multimeter-AC-DC-Test_W0QQitemZ170503865078QQcategoryZ58277QQcmdZViewItemQQ_trksidZp3907.m263QQ_trkparmsZalgo%3DSIC%26itu%3DUCI%252BIA%252BUA%252BIEW%252BFICS%252BUFI%252BDDSIC%26otn%3D20%26pmod%3D200459570494%26po%3DLVI%26ps%3D63%26clkid%3D6772440799011216247#ht_5019wt_911
Видео Technics SL MKII Pitch calibration part #1 how to calibrate 0 position. канала viperfrank
This is part one in a 2 part video showing you how to calibrate the pitch on a Technics SL MKII.
In this video I will show you how to calibrate the pitch 0 position, this should cure problems such as.
- two 0 positions on the pitch fader.
- Suddenly jolting out of 0 position.
- No 0 position at all.
If you have a different problem consult me before doing this as this may not sort your problem and it will be a waist of time.
There are some links below for some places you can get a multi meter.
Maplin electronics.
http://www.maplin.co.uk/Module.aspx?ModuleNo=37279
ebay.
http://cgi.ebay.co.uk/LCD-Digital-Voltmeter-Ammeter-Ohm-Multimeter-AC-DC-Test_W0QQitemZ170503865078QQcategoryZ58277QQcmdZViewItemQQ_trksidZp3907.m263QQ_trkparmsZalgo%3DSIC%26itu%3DUCI%252BIA%252BUA%252BIEW%252BFICS%252BUFI%252BDDSIC%26otn%3D20%26pmod%3D200459570494%26po%3DLVI%26ps%3D63%26clkid%3D6772440799011216247#ht_5019wt_911
Видео Technics SL MKII Pitch calibration part #1 how to calibrate 0 position. канала viperfrank
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Technics SL MKII Pitch calibration part #2 How to calibrate the pitch range.What should the dots do on a Technics SL1200 t table?How to calibrate the pitch on a technics 1210 using a multimeterHow to strip and clean a technics 1200 and 1210 Pitch slider.Technics 1200 GAE test runTechnics SL-1200 MK2 Pitch AdjustmentWhy Technics 1200 and 1210's are better for DJ mixing than modern turntables in 2017AT-LP120 vs SL-1200 Comparison (Part 2)anti-skating, whats it for?, how it works and how to adjust it properlyPerfect pitch calibration on a Mk2Fixing a Technics SL-1200Mk2 (How To Unstick It)Technics 1200 - Clean The DotsTechnics sl1210 mk2 regolazione velocitàVery Detailed Turntable Setup for BeginnersBuying Technics SL-1200MK2 SL1200M5G Things to check when Buying technics Turntables Tone arm CheckHow to polish a Technics 1200 turntablesTechnics SL1210 MK2 Erratic or Unstable Pitch FixDIFERENCIA ENTRE LOS LEGENDARIOS TECHNICS SL 1200 MK2 Y LOS TORNAMESAS RELOOP 8000Technics SL-1210MK7 internals