Repivoting technique #1, collet holding lathe, free hand
This is one of a couple techniques I use in repivoting. Shown in this video is a 4th wheel of a Zenith pocket watch. I use a standard American style 8mm collet holding lathe for the whole process, to repivot and finish the new pivot.
Видео Repivoting technique #1, collet holding lathe, free hand канала Repivot22
Видео Repivoting technique #1, collet holding lathe, free hand канала Repivot22
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
012 Making a drill for re-pivotting clock arbors #Clock #Repair #Workshop #Tools #Craft
Making a winding stem /巻真別作
07 Ageron French fusee restoration; mainspring & other issues
Boley and Leinen Watchmakers Lathe Repair, Refurbish and Then Use!
Classic Watchmaking: Grinding and Setting Up A Lathe Cutter
Hairspring Adjustment 01
Making a new pivot for the 3rd wheel. 入れホゾ
Re-pivoting a clock wheel - At the bench with Jobson Clocks.
Homemade Gear Cutting Indexer
Batch cutting wristwatch gears
Favorite Watchmakers Lathe (Sometimes I fall in Love)
James A. Lea, The Village Clockmaker. #22 Repivoting a contrate wheel arbor.
11 Ageron French fusee restoration, pinion finishing and fitting
13 Ageron French fusee restoration, eccentric bushing and last wheel
Repairing a broken pivot - making a centre drill guide - watch repair tutorial
20 Ageron French fusee, thinning a hairspring
Making a Clock Wheel for an Antique Clock - Start to Finish!
Making a 0.74mm Watch Screw - Full process
Clock Pivoting Center Finding Tool Demonstration
James A. Lea, The Village Clockmaker. Clock repair tutorial. #17 Part 1. Re-pivoting a bent arbor.