Re-pivoting a clock wheel - At the bench with Jobson Clocks.
This is episode 1 of 'At the bench'. I this episode I replace a small and eccentric pivot by drilling out with a carbide drill in the Pultra lathe. I hope you enjoy.
Видео Re-pivoting a clock wheel - At the bench with Jobson Clocks. канала Tommy Jobson
Видео Re-pivoting a clock wheel - At the bench with Jobson Clocks. канала Tommy Jobson
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
How To Make A Clock In The Home Machine Shop - Part 5 - Cutting The Pinions
Clock Pivoting Center Finding Tool Demonstration
Lorch Wälzmaschine (Deutsche Version)
Chronometer Train Wheel Repair Part 1
Watchmaking Doubleface Pocket Watch Repairing
Pinion Flank Polishing
Watchmaking, Tourbillon, spring detent, Chronometerfeder
Watchmaking, Replacing of a Glashütter balance staff, Unruhwelle ersetzen
Watchmaking, Use of a very Rare Tool, Ingold Fraise / Cutter
Gustav Becker Wall Clock repair, cleaning and replace bushings
Uhrmacherei, Zapfen an eine Konische Welle
Setting up a Schaublin 102 to cut a clock wheel.
Making a Clock Wheel for an Antique Clock - Start to Finish!
Cutting a clock wheel on the Schaublin 102 lathe.
Re-grinding a collet chuck and testing some cheap Chinese collets
The Village Clockmaker. Clock repair tutorial. #23. Rebushing a clock plate the easy way.
Repairing a broken pivot - making a centre drill guide - watch repair tutorial
Waltham Staff Replacement
Cutting a Clock Fusee Thread
Watchmakers lathe - How to turn Basic Cuts