8x6 Vlog ► Extractor Build Review - Small Workshop - Q&A - Stickers collecting in the Workshop
#8x6workshop #woodturning #shophacks
Home built dust extraction - Workshop cleaning - Olive wood - Tailstock uses. The first Vlog from the 8x6 workshop.
✦Dust Extractor Information✦
Though I don't have plans for my dust extractor I do list links to some of the most useful video's I found when building designing mine.
Silicone Gaskets
To make gaskets exactly the size and thickness you require is easy. NelsonStudios have a video to make large O rings using silicone sealant.
https://youtu.be/OH0YQ125wpg
I custom made gaskets to seal the junctions between the extractor and Thien baffle and the baffle and the collection box. I build a mould in a similar fashion to the ring method and cast the gaskets for the collector box lid and access door right on the wood itself.
Thien Baffle
There are many baffle videos to look at but a neat and simple design which influenced my build was by Gary Lucas. I replaced the 2mm polycarbonate sheet with 2mm MDF which was plenty strong enough.
https://youtu.be/xJw03BJQtlQ
Shop Built
A very good down to earth Thien baffle build
https://youtu.be/Feqih_7Evh0
My design would have been better if I could have made it just a couple of inches deeper but could not due to my limited space. However it does a good job and only some fine dust makes it through the unit which is caught in the cut down chip bag which acts as a filter. I was worried that the reduction in bag size may cause too much back pressure but it is livable with.I may, in a future project, duct the outlet pipe through the wall to the outside and do away with the bag altogether.
Extractor Unit
Mine came from Axminster Tools and is hobby rated 3/4hp. It's meant to service just one machine and would be underpowered to cope with a plumbed in ducting system but all i use it for is one machine. I just choose which machine I want by changing the coupling on the end! Most machine shop suppliers will carry a similar generic machine if you do not have an Axminster toy shop nearby.
http://www.axminster.co.uk/axminster-hobby-series-awde5002-extractor-501262
✦Mentions✦
Please do visit the channel of Annikas, you wont be dissapointed!
https://www.youtube.com/user/annikas88
✦Stickers✦
As mentioned in the Vlog I will be joining in with the sticker swap scene so if you want to do an exchange please contact me with the 'Send message' button on the 'About' page or though any of the social media messaging services below if you do not have a channel account.
✦Projects Video's✦
000 8x6 Workshop Intro & Tour ►https://youtu.be/dGtiL6pWmng
001 Decorated Oak Coin Bowl ►https://youtu.be/L7ir2YRJPgY
002 Billy's Ladder - Disability Build ►https://youtu.be/TLFqOJ7Llgg
003 Knutz - Rolling Pin Upcycle ►https://youtu.be/VMo9ZdrA1CI
004 The Practical Penguin ►https://youtu.be/ATkhx2kykaQ
005 Roof Mount Camera Rig https://youtu.be/wdY6xe6PMYo
006 2017 Valentine Challenge ►https://youtu.be/4dDwveJUhb0
008 Bowl of Sunshine ►https://youtu.be/OzcOHyUBGkI
✦8x6 Vlogs✦
007 Woodturners 10 Questions ► https://youtu.be/0g78hSwaU1w
✦60 Second Showcase Video's✦
Ringbox ► https://youtu.be/J_qEmoRa5s8
Видео 8x6 Vlog ► Extractor Build Review - Small Workshop - Q&A - Stickers collecting in the Workshop канала Stephen's 8x6 Workshop
Home built dust extraction - Workshop cleaning - Olive wood - Tailstock uses. The first Vlog from the 8x6 workshop.
✦Dust Extractor Information✦
Though I don't have plans for my dust extractor I do list links to some of the most useful video's I found when building designing mine.
Silicone Gaskets
To make gaskets exactly the size and thickness you require is easy. NelsonStudios have a video to make large O rings using silicone sealant.
https://youtu.be/OH0YQ125wpg
I custom made gaskets to seal the junctions between the extractor and Thien baffle and the baffle and the collection box. I build a mould in a similar fashion to the ring method and cast the gaskets for the collector box lid and access door right on the wood itself.
Thien Baffle
There are many baffle videos to look at but a neat and simple design which influenced my build was by Gary Lucas. I replaced the 2mm polycarbonate sheet with 2mm MDF which was plenty strong enough.
https://youtu.be/xJw03BJQtlQ
Shop Built
A very good down to earth Thien baffle build
https://youtu.be/Feqih_7Evh0
My design would have been better if I could have made it just a couple of inches deeper but could not due to my limited space. However it does a good job and only some fine dust makes it through the unit which is caught in the cut down chip bag which acts as a filter. I was worried that the reduction in bag size may cause too much back pressure but it is livable with.I may, in a future project, duct the outlet pipe through the wall to the outside and do away with the bag altogether.
Extractor Unit
Mine came from Axminster Tools and is hobby rated 3/4hp. It's meant to service just one machine and would be underpowered to cope with a plumbed in ducting system but all i use it for is one machine. I just choose which machine I want by changing the coupling on the end! Most machine shop suppliers will carry a similar generic machine if you do not have an Axminster toy shop nearby.
http://www.axminster.co.uk/axminster-hobby-series-awde5002-extractor-501262
✦Mentions✦
Please do visit the channel of Annikas, you wont be dissapointed!
https://www.youtube.com/user/annikas88
✦Stickers✦
As mentioned in the Vlog I will be joining in with the sticker swap scene so if you want to do an exchange please contact me with the 'Send message' button on the 'About' page or though any of the social media messaging services below if you do not have a channel account.
✦Projects Video's✦
000 8x6 Workshop Intro & Tour ►https://youtu.be/dGtiL6pWmng
001 Decorated Oak Coin Bowl ►https://youtu.be/L7ir2YRJPgY
002 Billy's Ladder - Disability Build ►https://youtu.be/TLFqOJ7Llgg
003 Knutz - Rolling Pin Upcycle ►https://youtu.be/VMo9ZdrA1CI
004 The Practical Penguin ►https://youtu.be/ATkhx2kykaQ
005 Roof Mount Camera Rig https://youtu.be/wdY6xe6PMYo
006 2017 Valentine Challenge ►https://youtu.be/4dDwveJUhb0
008 Bowl of Sunshine ►https://youtu.be/OzcOHyUBGkI
✦8x6 Vlogs✦
007 Woodturners 10 Questions ► https://youtu.be/0g78hSwaU1w
✦60 Second Showcase Video's✦
Ringbox ► https://youtu.be/J_qEmoRa5s8
Видео 8x6 Vlog ► Extractor Build Review - Small Workshop - Q&A - Stickers collecting in the Workshop канала Stephen's 8x6 Workshop
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
8x6 Tiny Workshop Tour - Much requested walk around of my 48 square feet of woodshop hacksMy New Workshop Dust Extraction SystemFour Clever Workshop Hacks - Space Saving tricks to my 8x6ft Woodworking and Woodturning ShopEvolution Of A MicroshopBat Box - Small Workshop & Aussie 4x2 Challenge - Project 013Easythreed X3 Operation VideoWEN 3401 Dust Collector - 1 Year Later Review!Micro workshop tour 97 ft easy storage organisation ideas for starting a tiny workshop/shed Man caveMotorised Display Turntable Build - A compact unit for shows, exhibitions and studio photography20FT SHIPPING CONTAINER WORKSHOP TOUR!Mini benchPVC Small workshop diy organiser8x6 Vlog ►Micaton Magnet Driver Review - Studio Makeover - Website Rebrand - Workshop Sticker UpdateDust Collection for Newbies: Introduction to Dust Collectionthe small shed #67 - completing the dust extractorStanley the Clamp - Box Set Binge (details in description)Sjobergs Workbench Build | Nordic Plus 1450 | SjöbergsStorage Shed Shop Tour - 2020 Small Workshop Tour | Woodworking Woodturning DIYSetting up a Workshop Cyclone