FreeCAD 5 simple 3D models, part 101

FreeCAD 5 simple 3D models, part 101
Welcome to the channel Miri tech workshop.
My name is Miro in this video there is an accelerated recording of the modeling of five 3D models. During the entire process in FreeCAD, I primarily used Part Design and Sketcher. Some models may have been created using incorrect procedures, but some tips may inspire you. If you have ideas or constructive criticism, please share them in the comments. Have a nice day :)

1.
I modeled a disk in which I drew shaped holes. At the beginning, I drew an annulus in "Part design" and a new sketch. Using the tool, I pushed the sketch into the space and a 3D model was created. In the new sketch I drew a shaped hole and made a recess with the tool. Using the "Polar pattern" I made this shaped hole symmetrical. At the end I changed the color of the 3D model for demonstration..
2.
I modeled a sheet with shaped holes. I drew a square in a new sketch and entered the necessary dimensions. I modeled in "Part design" After completing the square in the sketch I used "Fall" to create 3D. I used the area as a new sketch and drew a circle which I removed using "Pocket". Using Multi transform and then selecting "Linear pattern" I created multiple holes evenly across the entire surface. Similarly, I moved the shaped hole. At the end I changed the color of the 3D model
3.
I chose "Part design" at the beginning and in the new sketch I drew a closed shape. In the new sketch, I drew a profile that I wanted to follow the shape of the first sketch. I marked both sketches and used the "Additive pipe" tool. A 3D model of similar shapes can also be modeled in such a simple way.
1. 3D model. 00:00
2. 3D model. 02:12
3. 3D model. 05:56
4. 3D model. 08:09
5. 3D model. 09:47

Vitajte na kanáli Miri tech workshop. Moje meno je Miro v tomto videu je zrychleny zaznam z modelovania piatich 3D modelov. Počas celého procesu vo FreeCAD som primárne využíval Part Design a Sketcher. Niektoré modely mohli byť vytvorené pomocou nesprávnych postupov ale niektore tipy vas mozu inspirovat. Ak máte nápady alebo konštruktívnu kritiku, podeľte sa o ne v komentároch.
Prajem pekny den :)
#freecad #partdesign #3dmodeling #sketch

Видео FreeCAD 5 simple 3D models, part 101 канала Miri tech workshop