Cisco SPAG: Configuring TDM Pseudowires - Part 3/6: IP/MPLS and IP Routing
Starting where we left off in the previous video, we now configure the router identity so that MPLS forwarding can carry the pseudowires. We also introduce IP routing to connect the Layer Three components together.
Видео Cisco SPAG: Configuring TDM Pseudowires - Part 3/6: IP/MPLS and IP Routing канала SPAG Cisco
Видео Cisco SPAG: Configuring TDM Pseudowires - Part 3/6: IP/MPLS and IP Routing канала SPAG Cisco
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Tutorial - Configuring Unified MPLS Transport
Cisco SPAG: Configuring TDM Pseudowires - Part 5/6: Quality of Service (QoS)
Tutorial - Configuring Two Way Delay Measurement using Y1731 PM
Evolved Programmable Network (EPN) Operational Simplicity SDN Demo
Tutorial - Configuring CE2.0 Layer 2 Protocol Forwarding
Tutorial - Configuring ELAN Service using H-VPLS BGP Auto Discovery
Latency Demo by Ericsson
Tutorial - Configuring CFM on an ELINE Service
SPAG: Clocking & Sync Part 3/3: Configuration of Clocking and Timing
Cisco SPAG: Configuring TDM Pseudowires - Part 4/6: Timing and Synchronization
Auto IP Tutorial HQ
Node insertion demo
SLA based Service Fast Reroute
Cisco SPAG: Configuring TDM Pseudowires - Part 2/6: EVC and Bridge Domain Interfaces (BDI)
SPAG: Clocking & Sync Part 1/3: TDM and Packet-based Frequency Sync
Cisco SPAG: Configuring TDM Pseudowires - Part 1/6: Introduction and Overview
Tutorial - Configuring ELINE Services
SPAG: Clocking & Sync Part 2/3: IEEE 1588 and PTPv2
Cisco ASR900 & ASR920 Product Family Technical Webinar
Cisco SPAG: Configuring TDM Pseudowires - Part 6/6: TDM Circuits and Pseudowires