3D Printed RC Utility Boat - Hull and Drive System - Part 1

I designed and 3D printed a big radio controlled boat. It's designed as a sort of utility airboat and will house water monitoring and other utility systems. In part one of this video series I build the basics of the boat and test it out on some open water.

Printed on Creality CR-10 and Ender 3 Pro 3D printers using 3D Fillies PLA+ and Aurarum Carbon PLA with 0.6 mm nozzle at 0.36 mm layer height (CR-10) for the big parts and with 0.4 mm nozzle at 0.2 layer height (Ender 3) for the smaller parts. Parts design and modification was done by me in DesignSpark Mechanical. Shot on Canon EOS M50, 360 video footage shot on Insta360 One R and DJI Mavic Mini for the aerial shots.

STL files and a build guide now available on Thingiverse: https://www.thingiverse.com/thing:4884505
Bits and Pieces featured in this video:

3D Phillies PLA+
Aurarum Carbon PLA
4S Lithium Battery Pack Power Indicator Board
Propdrive V2 3536 910 KV Brushless Motor
Aerostar RVS 60A Electronic Speed Controller W/Reverse
Dynam Carbon Fiber 11 x 5.5 Propeller
Spektrum AR8000 Receiver with TM1000 Telemetry Module
Power HD LW-20 KG Waterproof Digital Servo
Zippy 5000 mah 30C LiPo Battery

Watch Next

3D Printed RC Utility Boat - Part 2 - Water Sampling System
https://youtu.be/Bp1Fw5bALzA

Swooping Aussie Magpie Versus 3D Printed Defences
https://youtu.be/tfjzxrPUkpg

Making an Apple AirPods Pro Hair Dryer - 3D Printed EDF and LiPo Powered
https://youtu.be/K3Rf27UVzZc

Escalator Bait Prank - Apple AirPods Pro
https://youtu.be/idqln_GTZO0
00:00 Intro and Design
01:30 3D Printing
02:33 Assembling the Boat
05:39 Float Test
06:29 Electronics
07:55 Test on Open Water
09:57 Outro

Instagram , TikTok, Facebook and Twitter: @electrosync
Website: www.electrosync.com.au
Contact: studio@electrosync.com.au

#3Dprinted #RadioControlled #Boat

Видео 3D Printed RC Utility Boat - Hull and Drive System - Part 1 канала electrosync