BIG 3D Printed RC Speed Boat
Here's the video I talked about in the video: https://youtu.be/Dx8P-MDDVEM
Creality CR-10 3d printer: https://goo.gl/bJFYTB
RC boat: https://goo.gl/yybVW9
RC car: https://goo.gl/VRsk6W
Drone: https://goo.gl/wxGx5K
In today's video I 3d printed a radio controlled boat using the Creality CR-10s 3d printer. The boat was printed in 5 body sections and an additional 3 hatch sections. I glued the part together using epoxy that seemed to work fairly well, though you really need to install some reinforcement brackets in order to have a solid construction.
The boat is powered by a massive brushless motor (2650kv), that I salvaged from one of my RC cars. With a 120A electric speed controller and a 4S 6Ah battery (16V), it would have all the power in the world!
RC boat STL file: https://www.thingiverse.com/thing:2622635
Almost immediately after testing the boat for the first time I noticed several major flaws. The 5 body sections is only held together by glue, you would greatly benefit with some cross-going spars that would reinforce the structure. As I explained in the video, even though it was no immediate leakage, the water creeps through the PLA. It has mostly likely something to do with the settings used to print all the sections.
There were also a situation with the propeller surfacing too much and not pushing the boat forward. It was unclear if the boat was too heavy or too light and the glue was less than optimal in water.
To be continued...
Music:
Beautiful Cinematic Music - Beyond
Blue Wednesday - Need You Around
Liam.M - I Dont Need It
MGR 7TH - In A Lifetime
Видео BIG 3D Printed RC Speed Boat канала RCLifeOn
Creality CR-10 3d printer: https://goo.gl/bJFYTB
RC boat: https://goo.gl/yybVW9
RC car: https://goo.gl/VRsk6W
Drone: https://goo.gl/wxGx5K
In today's video I 3d printed a radio controlled boat using the Creality CR-10s 3d printer. The boat was printed in 5 body sections and an additional 3 hatch sections. I glued the part together using epoxy that seemed to work fairly well, though you really need to install some reinforcement brackets in order to have a solid construction.
The boat is powered by a massive brushless motor (2650kv), that I salvaged from one of my RC cars. With a 120A electric speed controller and a 4S 6Ah battery (16V), it would have all the power in the world!
RC boat STL file: https://www.thingiverse.com/thing:2622635
Almost immediately after testing the boat for the first time I noticed several major flaws. The 5 body sections is only held together by glue, you would greatly benefit with some cross-going spars that would reinforce the structure. As I explained in the video, even though it was no immediate leakage, the water creeps through the PLA. It has mostly likely something to do with the settings used to print all the sections.
There were also a situation with the propeller surfacing too much and not pushing the boat forward. It was unclear if the boat was too heavy or too light and the glue was less than optimal in water.
To be continued...
Music:
Beautiful Cinematic Music - Beyond
Blue Wednesday - Need You Around
Liam.M - I Dont Need It
MGR 7TH - In A Lifetime
Видео BIG 3D Printed RC Speed Boat канала RCLifeOn
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
3D Printed RC Boat with JET PROPULSIONDelivering Candy to Kids with RC FPV CarAwesome 3D Printed RC AirboatHow This Electric Motor BOOSTED My RC Boat3D Printed RC Hovercraft on SPEED!IT'S TOO POWERFUL - 3D Printed RC BoatDRIVING A Hydroplaning RC CAR On WATER!3D Printed Racing Drone - Will It Survive?3D Printed RC Utility Boat - Hull and Drive System - Part 1Homemade 10000W Electric Surfboard Part 1NEW 3D Printed Jet Boat - PART 23D Printed Vectoring Mechanism15 Most Unusual RC Models In The WorldCheap Walmart RC boat mods10 Awesome and Practical 3D Prints!Top 10 3D Printable Tools Every Maker Should, Like, MakeFast RC Boat Electronics Options, Weight Distribution, Prop Selection, Setup & Install Pt2 How ToFABRIQUER UN BATEAU AVEC UNE IMPRIMANTE 3D ! - MODÉLISMEHow This 7000W Motor Was NOT Powerful Enough!