3D Printed RC Utility Boat - Water Sampling Mission - Part 3

I designed and 3D printed a big radio controlled boat. It's designed as a sort of utility airboat and will house water monitoring and other utility systems. In part three of this video series I take the boat out to a lake to test the water sampling systems and then have the samples analysed for blue-green algae.

You can check out the algae test result reports here: https://electrosync.com.au/2021/01/08/3d-printed-rc-utility-boat/

Printed on Creality CR-10 and Ender 3 Pro 3D printers using 3D Fillies PLA+ with 0.6 mm nozzle at 0.36 mm layer height (CR-10) for the big parts and with 0.4 mm nozzle at 0.2 layer height (Ender 3) for the smaller parts. Parts design and modification was done by me in DesignSpark Mechanical. Shot on Canon EOS M50, 360 video footage shot on Insta360 One R and DJI Mavic Mini for the aerial shots.

00:00​​ Intro
00:45​ Hitting the Road
01:26​​ Lake Moodemere
02:06​​ Quick Test
02:38​ Collecting the Samples
04:26 Back on the Road
05:07​ Water Test Results
06:39​ Outro

Watch Next

3D Printed RC Utility Boat - Part 1 - Hull and Drive System
https://youtu.be/0KblE-0bh7o​

3D Printed RC Utility Boat - Part 2 - Water Sampling System
https://youtu.be/Bp1Fw5bALzA

Swooping Aussie Magpie Versus 3D Printed Defences
https://youtu.be/tfjzxrPUkpg​​

Making an Apple AirPods Pro Hair Dryer - 3D Printed EDF and LiPo Powered
https://youtu.be/K3Rf27UVzZc​​

Escalator Bait Prank - Apple AirPods Pro
https://youtu.be/idqln_GTZO0​​
Instagram , TikTok, Facebook and Twitter: @electrosync
Website: www.electrosync.com.au
Contact: studio@electrosync.com.au

#3Dprinted​​ #RadioControlled​​ #Boat

Видео 3D Printed RC Utility Boat - Water Sampling Mission - Part 3 канала electrosync