Review & test of Gearbest's Pixhawk and comparison with 3DR's Pixhawk
Recent 3DR's move not to sell DIY components & parts anymore, pushes hobbyists and prosumers to diversify their supplier's sources. Like many others in the community, my issue is to find an "as good quality as 3DR" alternative for a Pixhawk board. I started looking around for possible 3DR Pixhawk replacement candidates, with a quality I can trust in my builds.
There exist myriads of different "Pixhawk" equivalent boards. Most of them are not direct drop-in replacements as they are equipped with different connectors and have different sizes and shapes. Furthermore, most of them do not share the same quantity and redundancy of sensors (i..e.: two gyro, two accel, compass, baro, etc). A direct drop-in replacement is essential for prosumers and professionals trying to standardize parts, connections and components to a maximum.
Then, I was kindly requested by Gearbest to review some of their new FPV racer quad; offer which I declined being a very poor racer pilot (wouldn't have made justice to their fpv quad), proposing them instead to review their Pixhawk board which looked to be an exact match for 3DR Pixhawk board on all aspects: schematics, size, shape, connectors, etc.
This is what this video is about : a test, review and comparison of Gearbest's Pixhawk (versus 3DR's Pixhawk).
Gearbest Pixhawk board: http://goo.gl/acZnx9
Music by Kevin MacLeod - incompetech.com
Видео Review & test of Gearbest's Pixhawk and comparison with 3DR's Pixhawk канала Hugues D
There exist myriads of different "Pixhawk" equivalent boards. Most of them are not direct drop-in replacements as they are equipped with different connectors and have different sizes and shapes. Furthermore, most of them do not share the same quantity and redundancy of sensors (i..e.: two gyro, two accel, compass, baro, etc). A direct drop-in replacement is essential for prosumers and professionals trying to standardize parts, connections and components to a maximum.
Then, I was kindly requested by Gearbest to review some of their new FPV racer quad; offer which I declined being a very poor racer pilot (wouldn't have made justice to their fpv quad), proposing them instead to review their Pixhawk board which looked to be an exact match for 3DR Pixhawk board on all aspects: schematics, size, shape, connectors, etc.
This is what this video is about : a test, review and comparison of Gearbest's Pixhawk (versus 3DR's Pixhawk).
Gearbest Pixhawk board: http://goo.gl/acZnx9
Music by Kevin MacLeod - incompetech.com
Видео Review & test of Gearbest's Pixhawk and comparison with 3DR's Pixhawk канала Hugues D
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
How to setup a Pixhawk flight controllerTS100 Review and Test (portable solder iron)APM Copter V3.2 Release - "DJI S900" with "3DR Pixhawk" board and "UBlox Neo M8" gpsFirst Look at the EagleTree Vector & Why I went for the Vector over the Pixhawk PX4Pixhawk Power Redundancy Using Zener Diode And Capacitor - Prevent Pixhawk RebootPixhawk Auto Take Off Compilation - ArduplaneKakuteF7 voltage test : how low can it be powered ?3" sub 250 microdrone 28 minutes flight time !!Connecting Raspberry Pi w/ Pixhawk and Communicating via MAVLink ProtocolFlight controllers--Which one is best?3DR Pixhawk Installation Part 1 - Physical ConnectonsuBlox ZED-F9P new GPS test (and comparison to M8 series)Pixhawk Tips and Field Test with FBWA and RTL Flight ModesPixhawk LED and Sounds AC3.2Pixhawk Interface with Taranis X9D & X8R using SbusPixhawk Unboxing and Installation in QAV500Product Showcase: Pixhawk 4 Mini Flight Controller(2/5) PixHawk Video Series – Power, installation, final checks and first hoverPixhawk peripherals - overview and connection guideMako Pixhawk VTOL Maiden Transition to Forward Flight