(2/5) PixHawk Video Series – Power, installation, final checks and first hover
To view all of the videos in this series visit – https://www.youtube.com/playlist?list=PLYsWjANuAm4r4idFZY24pP6s1K6ABMU0p
In this second video in the series we cover the installation of the basic components onto the frame, how to power the board, what the flashing LEDs mean, how to check that we can arm it and the motors all work, confirm the direction of the radio controls (especially the elevator/pitch control) and finally perform a test hover.
Useful links:
http://copter.ardupilot.com/wiki/common-powering-the-pixhawk/
https://pixhawk.org/modules/pixhawk#pinouts
Thanks to ‘R’ for donating the Pixhawk for this series - he is a very generous chap.
In this video we cover:
- Introduction (0:02)
- Power options (0:53)
- Installing the elements onto a 450 quad frame (4:36)
- Connecting the ESCs (7:59)
- Final checks (11:20)
- LED sequences (12:15)
- Checking for the correct radio channel movement (16:59)
- Test Hover and Summary (18:07)
Thanks for watching, please LIKE and SUBSCRIBE
Happy flying!
Видео (2/5) PixHawk Video Series – Power, installation, final checks and first hover канала Painless360
In this second video in the series we cover the installation of the basic components onto the frame, how to power the board, what the flashing LEDs mean, how to check that we can arm it and the motors all work, confirm the direction of the radio controls (especially the elevator/pitch control) and finally perform a test hover.
Useful links:
http://copter.ardupilot.com/wiki/common-powering-the-pixhawk/
https://pixhawk.org/modules/pixhawk#pinouts
Thanks to ‘R’ for donating the Pixhawk for this series - he is a very generous chap.
In this video we cover:
- Introduction (0:02)
- Power options (0:53)
- Installing the elements onto a 450 quad frame (4:36)
- Connecting the ESCs (7:59)
- Final checks (11:20)
- LED sequences (12:15)
- Checking for the correct radio channel movement (16:59)
- Test Hover and Summary (18:07)
Thanks for watching, please LIKE and SUBSCRIBE
Happy flying!
Видео (2/5) PixHawk Video Series – Power, installation, final checks and first hover канала Painless360
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
(3/5) PixHawk Video Series – Tips for setting up your Taranis RadioCleanest Built Pixhawk 2.4.8 Drone | F450 frameDIY drone (Part Two) | S500 | Pixhawk | FPV Quadcopter |(4/5) PixHawk Video Series – Introduction to flight modes(1/5) PixHawk Video Series - Simple initial setup, config and calibration(5/5) PixHawk Video Series – Common Power Options (BEC, Power Modules, ESCs and combos)3DR Pixhawk Installation Part 1 - Physical ConnectonsPixhawk4 Setup | Tarot Frame | Extended Arms | BuildConnecting Raspberry Pi w/ Pixhawk and Communicating via MAVLink ProtocolPixhawk 2.4.8 fmuV3 and APM 2.8- FC - ESC CalibrationHow to setup a Pixhawk flight controllerPixHawk/Mission Planner/ArduPlane Build for Beginners: Installing into a 'planeRCExplorer BICOPTER BUILD/setup videoMy Flight Controller Picks for New Builds (May 2020)Pixhawk 4 Receiver and Transmitter Configuration | Pixhawk 4 + S500 Drone Build Tutorial | Part 3DIY drone (Part One) | S500 | Pixhawk | FPV Quadcopter |Radiolink Mini PIX first look + newbie fumbling through Ardupilot setupPixHawk/Mission Planner/ArduPlane Build for Beginners: Maiden Flight TipsPixHawk/Mission Planner/ArduCopter Build for Beginners: Installation