(5/5) PixHawk Video Series – Common Power Options (BEC, Power Modules, ESCs and combos)
To view all of the videos in this series visit – https://www.youtube.com/playlist?list=PLYsWjANuAm4r4idFZY24pP6s1K6ABMU0p
In this video we cover the options for how to power your PixHawk. We cover the options for connecting power to the Power port on the top of the PixHawk, then cover the options for connecting the wires from the ESCs to the other side of the power system. We discuss redundancy and recommendations when using servos for gimbals and landing gear.
Thanks to ‘R’ for donating the PixHawk for this series - he is a very generous chap.
Useful links if you want to know more are:
http://copter.ardupilot.com/wiki/common-optional-hardware/common-powermodule-landingpage/common-using-a-pixhawk-with-6s-batteries/
http://copter.ardupilot.com/wiki/common-measuring-battery-voltage-and-current-consumption-with-apm/
http://copter.ardupilot.com/wiki/common-powering-the-pixhawk/
http://copter.ardupilot.com/wiki/common-autopilots/common-pixhawk-overview/#pixhawk_analog_input_pins_virtual_pin_firmware_mapped_pin_id
In this video we cover:
- Introduction (0:02)
- The options to power the board via the POWER connection (1:13)
- The options for connecting ESCs (linear, switched and OPto) (4:25)
- Recommendations when running servos from the output rail (8:17)
- Summary (9:40)
Thanks for watching, please LIKE and SUBSCRIBE
Видео (5/5) PixHawk Video Series – Common Power Options (BEC, Power Modules, ESCs and combos) канала Painless360
In this video we cover the options for how to power your PixHawk. We cover the options for connecting power to the Power port on the top of the PixHawk, then cover the options for connecting the wires from the ESCs to the other side of the power system. We discuss redundancy and recommendations when using servos for gimbals and landing gear.
Thanks to ‘R’ for donating the PixHawk for this series - he is a very generous chap.
Useful links if you want to know more are:
http://copter.ardupilot.com/wiki/common-optional-hardware/common-powermodule-landingpage/common-using-a-pixhawk-with-6s-batteries/
http://copter.ardupilot.com/wiki/common-measuring-battery-voltage-and-current-consumption-with-apm/
http://copter.ardupilot.com/wiki/common-powering-the-pixhawk/
http://copter.ardupilot.com/wiki/common-autopilots/common-pixhawk-overview/#pixhawk_analog_input_pins_virtual_pin_firmware_mapped_pin_id
In this video we cover:
- Introduction (0:02)
- The options to power the board via the POWER connection (1:13)
- The options for connecting ESCs (linear, switched and OPto) (4:25)
- Recommendations when running servos from the output rail (8:17)
- Summary (9:40)
Thanks for watching, please LIKE and SUBSCRIBE
Видео (5/5) PixHawk Video Series – Common Power Options (BEC, Power Modules, ESCs and combos) канала Painless360
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
How to setup a Pixhawk flight controller(1/5) PixHawk Video Series - Simple initial setup, config and calibrationPixhawk 4 - Wiring UpdateHow Li-Ion batteries can extend your flight time/reduce weightSiK and 3DR 433Mhz 915Mhz Radio Telemetry ground Station for PixhawkDIY drone (Part Two) | S500 | Pixhawk | FPV Quadcopter |(3/5) PixHawk Video Series – Tips for setting up your Taranis RadioMauch Power Module Installation and SetupMAUCH PL Series BEC & Current Sensor for Pixhawk & Cube AutopilotsS500 Quadcopter Frame Guided Assembly | Pixhawk 4 + S500 Drone Build Tutorial | Part 23DR Pixhawk Installation Part 1 - Physical ConnectonsConnecting Raspberry Pi w/ Pixhawk and Communicating via MAVLink ProtocolThe Cube Orange Autopilot/Flight Controller With ADS-B Overview, Setup & ADSB DemoPixHawk/Mission Planner/ArduPlane Build for Beginners: Installing into a 'planeSoldering for beginners: how to solder cables to PDBFirst Look: HolyBro Latest Pixhawk 4 Flight Controller(4/5) PixHawk Video Series – Introduction to flight modesOpenTX Quick Tip: Failsafe (D16)(1/9) Introduction to PixHawk 2.1: Introduction