How to setup a Pixhawk flight controller
Please check out our online shop for all your drone needs: https://droneshop.biz
This video shows:
- How to setup a Pixhawk flight controller including initial test flight.
- How to connect the devices like power module, GPS & compass.
- Load the firmware, load a parameters file to get you started, then calibration steps.
- Basic tuning and initial test flight.
Refer to the ardupilot.com site for more details: http://ardupilot.com
Downloads:
Mission Planner: http://ardupilot.com/downloads/?did=82
Our params and files: https://drive.google.com/folderview?id=0B-B7PQy0joGrUjFmb2pSTFlqcWc&usp=sharing
Silabs CP210x driver for Radio telemetry: https://www.silabs.com/products/mcu/Pages/USBtoUARTBridgeVCPDrivers.aspx
If you require a pixhawk or any of the parts used, just visit https://droneshop.biz
Pixhawk flight controllers: https://droneshop.biz/product-category/parts/flight-controllers/
For the Pixhawk drivers they are installed with Mission Planner, if your system missed the install then just find the device in your Device hardware list and select the driver under Program files x86/Mission Planner/drivers
Видео How to setup a Pixhawk flight controller канала DroneShop Biz
This video shows:
- How to setup a Pixhawk flight controller including initial test flight.
- How to connect the devices like power module, GPS & compass.
- Load the firmware, load a parameters file to get you started, then calibration steps.
- Basic tuning and initial test flight.
Refer to the ardupilot.com site for more details: http://ardupilot.com
Downloads:
Mission Planner: http://ardupilot.com/downloads/?did=82
Our params and files: https://drive.google.com/folderview?id=0B-B7PQy0joGrUjFmb2pSTFlqcWc&usp=sharing
Silabs CP210x driver for Radio telemetry: https://www.silabs.com/products/mcu/Pages/USBtoUARTBridgeVCPDrivers.aspx
If you require a pixhawk or any of the parts used, just visit https://droneshop.biz
Pixhawk flight controllers: https://droneshop.biz/product-category/parts/flight-controllers/
For the Pixhawk drivers they are installed with Mission Planner, if your system missed the install then just find the device in your Device hardware list and select the driver under Program files x86/Mission Planner/drivers
Видео How to setup a Pixhawk flight controller канала DroneShop Biz
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Building a quadcopter: Configuration Calibration & Testing(1/5) PixHawk Video Series - Simple initial setup, config and calibrationConnecting Raspberry Pi w/ Pixhawk and Communicating via MAVLink ProtocolSiK and 3DR 433Mhz 915Mhz Radio Telemetry ground Station for PixhawkПодключение и основные настройки PixhawkA to Z Detail Of Pixhawk Flight Controller | Pixhawk Controller Review - Drone Flight ControllerDIY drone (Part Two) | S500 | Pixhawk | FPV Quadcopter |Pixhawk AutoTune How ToCommon PixHawk Setup Problems and How to Avoid Them!How to setup a minimOSD for APM or PixhawkPixhawk Auto Tune and first flightsFirst Look: HolyBro Latest Pixhawk 4 Flight ControllerPixHawk/Mission Planner/ArduPlane Build for Beginners: Flashing and basic setupPX4 Autopilot Setup Tutorial PreviewFlying the MFD 5000/3000 Heavy Lift Drone with a Pixhawk 2.1/Cube and HereLink : Full TutorialZD550 with Pixhawk 2.4.8 build(2/5) PixHawk Video Series – Power, installation, final checks and first hover3DR Pixhawk Installation Part 1 - Physical ConnectonsHow To Make Drone | Pixhawk Flight Controller Setup and Wiring | Drone Kaise Banaye - At HomePixHawk/Mission Planner/ArduPlane Build for Beginners: Installing into a 'plane