Mold Making Tutorial: Tips For Platinum Silicone mold making
In this mold-making tutorial we mold a nut and bolt using 71-11 PlatSil silicone to demonstrate some basic methods and precautions when making platinum silicone molds.
Get this Kit:
http://www.brickintheyard.com/products/platsilmoldingandcastingkit
71-11 is a low viscosity addition cure silicone that may be used to make molds for soap, candles, and delicate resin parts. Because of the low viscosity of 71-11 it does not have to be degassed. If you are making molds for resin that will require pressure casting the silicone will need to be degassed, otherwise micro bubbles will occur in the rubber causing small imperfections in the pressure cast resin.
Видео Mold Making Tutorial: Tips For Platinum Silicone mold making канала Brick In The Yard Mold Supply
Get this Kit:
http://www.brickintheyard.com/products/platsilmoldingandcastingkit
71-11 is a low viscosity addition cure silicone that may be used to make molds for soap, candles, and delicate resin parts. Because of the low viscosity of 71-11 it does not have to be degassed. If you are making molds for resin that will require pressure casting the silicone will need to be degassed, otherwise micro bubbles will occur in the rubber causing small imperfections in the pressure cast resin.
Видео Mold Making Tutorial: Tips For Platinum Silicone mold making канала Brick In The Yard Mold Supply
Показать
Комментарии отсутствуют
Информация о видео
3 марта 2014 г. 9:45:41
00:10:09
Другие видео канала
![Mold Making Tutorial: 2 Piece Silicone hammer mold With 73-20](https://i.ytimg.com/vi/R3HvPuvvuDQ/default.jpg)
![Make Your Own Silicone Molds - Easy Mold Making (Mould) - For Candle Or Resin Molds](https://i.ytimg.com/vi/_nXy1j5b6q0/default.jpg)
![Resin Casting tutorial: Pressure Casting Water Clear WC-786 Resin](https://i.ytimg.com/vi/l9imlxIIW2g/default.jpg)
![Quick Guide To PlatSil Gels For Lifecasting, Special FX, And Mold Making](https://i.ytimg.com/vi/WOC0Ycm7WoQ/default.jpg)
![Introduction to TAP Platinum Silicone](https://i.ytimg.com/vi/cj4kXAn83SA/default.jpg)
![Testing ways to prevent cure inhibition in platinum silicone, when casting 3d resin printed parts.](https://i.ytimg.com/vi/_-3_bCDm7aM/default.jpg)
![Силиконов калъп / Silicone mold](https://i.ytimg.com/vi/G2UEMPjfhCg/default.jpg)
![Mold Star 15 platinum silicone demo and review](https://i.ytimg.com/vi/hP0k1DcjFp0/default.jpg)
![Wall brick mold making from rubber](https://i.ytimg.com/vi/3zwnlz8V18E/default.jpg)
![How to Mold and Cast a Lightsaber!](https://i.ytimg.com/vi/DEVi0mEaJJQ/default.jpg)
![Lifecasting Tutorial: Accucast 590 Face Cast](https://i.ytimg.com/vi/PDCeyHnCA1o/default.jpg)
![DIY Silicone Molds - Excerpt](https://i.ytimg.com/vi/6ikF1h2QbM4/default.jpg)
![Make Your Own SILICONE MOLDS on a BUDGET -TESTING 4 METHODS](https://i.ytimg.com/vi/lZeQNih7MuI/default.jpg)
![Moldmaking Tutorial: 2 Piece Scale Model Car Mold](https://i.ytimg.com/vi/dBEK_Jyfvek/default.jpg)
![Urethane casting technology](https://i.ytimg.com/vi/nVikYG24New/default.jpg)
![Lifecasting Tutorial: Hand casting with mold tube & Silicone](https://i.ytimg.com/vi/p5zCbFGJQJc/default.jpg)
![Alumilite Explains: How to Choose a Silicone](https://i.ytimg.com/vi/7hWjIw5E7Oc/default.jpg)
![MAKE your own SILICONE MOLDS on a budget](https://i.ytimg.com/vi/8ekC1x0Coi4/default.jpg)
![Mold Making & Resin Casting: Making Fake Bolts](https://i.ytimg.com/vi/gaZKGlE18Hs/default.jpg)
![How to make a silicone rubber brush-on mold.](https://i.ytimg.com/vi/h_xDCvyvjqU/default.jpg)