Testing ways to prevent cure inhibition in platinum silicone, when casting 3d resin printed parts.

Hello and welcome. In this video I'll be showing some tests I did in an attempt to prevent cure inhibition in platinum cure silicone when making molds from 3d printed resin parts. I'm using cheap Elegoo and Phrozen resin for this one. I'm trying to avoid expensive chemical dips like Smooth-On's Inhibit X, or coating in some kind of isolation layer (like XTC 3D, or laquer) as that would reduce detail. I'll be following this up with another round of testing as this wasn't 100% successful.
Thanks for watching.

A link to building a vacuum chamber by Geoff, The veg oil guy.
https://youtu.be/bv3tYR4ROBs

Things I make on my etsy page: https://Etsy.com/shop/RichardThompsonCA
My personal website: https://www.richardthompson.ca
My commercial illustration site: https://www.rtillustration.com
Follow me on Instagram: https://www.instagram.com/Learn.Imagine.Create
Follow me on Facebook: https://www.facebook.com/RichardThompsonIllustration

This video is for entertainment purposes only, I make no warranties about the completeness, reliability and accuracy of the information contained therein. Any action you take upon the information in this video is strictly at your own risk, and I am not liable for any losses or injuries incurred as a result.

#casting
#resin
#3dprinting

Видео Testing ways to prevent cure inhibition in platinum silicone, when casting 3d resin printed parts. канала Richard Thompson