PLC Ladder programming #1 | Learn under 5 min | NO NC contacts | AND gate logic
Steps towards learning Automation - 04
------------------------------------------------------------------
In this episode, we will understand what is PLC ladder programming
PLC is a logic controller which has inputs and outputs to control a particular process. The relation between these inputs and outputs is established via a control logic. This control logic can be written using different programming languages. One of the most common and easier to understand language is the ladder programming. Check the video to know why the language is called ladder programming.
This video further discusses what are NO (Normally Open) and NC (Normally Closed) contacts and how they can be used in control logic to achieve a specific task. These programming blocks are explained using animations and example. The logic for AND gate is developed using these contacts. The further videos in this series will also cover more examples on developing logics using NO and NC contacts.
Hope you enjoy the video. Stay Calm and Keep Learning !!!
Subscribe to the channel to stay updated on the new content
----------------------------------------------------
Link to the #1 video in the series: https://youtu.be/rFs0zwx_s9g
Introduction to PLC | Programmable logic controllers | Steps towards learning Automation - 01
Link to the #2 video in the series: https://youtu.be/fmEmvSazqq8
How does a relay work? | Normally Open | Normally Closed | Steps towards learning Automation - 02
Link to the #3 video in the series: https://youtu.be/6sQt1N0nBeE
Concept of Sinking and Sourcing in PLC | Steps towards learning Automation - 03
Link to the #4 video in the series: https://youtu.be/zsajTNtxfAE
PLC Ladder programming #1 | NO NC contacts | AND gate logic | Steps towards learning Automation - 04
-----------------------------------------------------
Link to the video on Derived gates:
https://youtu.be/wGilEPBfcT8
Link to our video on Boolean algebra
https://youtu.be/V4QRxFruzk8
Link to previous videos on Gates:
Basic gates https://youtu.be/-6w-MHjwzT0
Derived gates https://youtu.be/wGilEPBfcT8
Mathematical operations in digital systems
Addition and Subtraction https://youtu.be/7gmXjdDE1DQ
Multiplication and Division https://youtu.be/2lemxMYsJXU
Constructing gates
Using NAND https://youtu.be/okZBqPd1xd4
Using NOR https://youtu.be/auh8NRN0wR0
Link to the video: https://youtu.be/sVc-XIysw0c
on Double Beam Spectrometer
Link to the video: https://youtu.be/CcN8NnGGPhs
on Basics and principle of Fluorescence & Phosphorescence measurement in Analytical Instrumentation
Link to the video: https://youtu.be/MKFjGIrRKt4
on Basics of UV-Vis spectroscopy in Analytical Instrumentation
Link to the video: https://youtu.be/pxDbEkspXs0
on Filters and Monochromators, Gratings used in Analytical Instrumentation
Link to the video: https://youtu.be/YI17AmrR5Iw
on Detectors used in Analytical Instrumentation:
Link to the video: https://youtu.be/J8Bqyqjlqy0
on Single Beam Photometer used in Analytical Instrumentation
-------------------------------------------------------------------------------------------
Check our playlist on Digital Electronics:
https://www.youtube.com/playlist?list=PLsaRQCHmdZTBd8xnz_XqhHYdFGlnDapC4
Check our playlist on Analytical Instrumentation:
https://www.youtube.com/playlist?list=PLsaRQCHmdZTAuxG5X1G9W7zl_p3uwEmY0
-------------------------------------------------------------------------------------------
Follow us on:
----------------------------
Website http://practicalninjas.com/
Facebook https://www.facebook.com/practicalninjas/
Twitter https://twitter.com/practicalninjas
Instagram https://www.instagram.com/practicalninjas/
#plctutorials #ladderlogic #practicalninjas
Видео PLC Ladder programming #1 | Learn under 5 min | NO NC contacts | AND gate logic канала Practical Ninjas
------------------------------------------------------------------
In this episode, we will understand what is PLC ladder programming
PLC is a logic controller which has inputs and outputs to control a particular process. The relation between these inputs and outputs is established via a control logic. This control logic can be written using different programming languages. One of the most common and easier to understand language is the ladder programming. Check the video to know why the language is called ladder programming.
This video further discusses what are NO (Normally Open) and NC (Normally Closed) contacts and how they can be used in control logic to achieve a specific task. These programming blocks are explained using animations and example. The logic for AND gate is developed using these contacts. The further videos in this series will also cover more examples on developing logics using NO and NC contacts.
Hope you enjoy the video. Stay Calm and Keep Learning !!!
Subscribe to the channel to stay updated on the new content
----------------------------------------------------
Link to the #1 video in the series: https://youtu.be/rFs0zwx_s9g
Introduction to PLC | Programmable logic controllers | Steps towards learning Automation - 01
Link to the #2 video in the series: https://youtu.be/fmEmvSazqq8
How does a relay work? | Normally Open | Normally Closed | Steps towards learning Automation - 02
Link to the #3 video in the series: https://youtu.be/6sQt1N0nBeE
Concept of Sinking and Sourcing in PLC | Steps towards learning Automation - 03
Link to the #4 video in the series: https://youtu.be/zsajTNtxfAE
PLC Ladder programming #1 | NO NC contacts | AND gate logic | Steps towards learning Automation - 04
-----------------------------------------------------
Link to the video on Derived gates:
https://youtu.be/wGilEPBfcT8
Link to our video on Boolean algebra
https://youtu.be/V4QRxFruzk8
Link to previous videos on Gates:
Basic gates https://youtu.be/-6w-MHjwzT0
Derived gates https://youtu.be/wGilEPBfcT8
Mathematical operations in digital systems
Addition and Subtraction https://youtu.be/7gmXjdDE1DQ
Multiplication and Division https://youtu.be/2lemxMYsJXU
Constructing gates
Using NAND https://youtu.be/okZBqPd1xd4
Using NOR https://youtu.be/auh8NRN0wR0
Link to the video: https://youtu.be/sVc-XIysw0c
on Double Beam Spectrometer
Link to the video: https://youtu.be/CcN8NnGGPhs
on Basics and principle of Fluorescence & Phosphorescence measurement in Analytical Instrumentation
Link to the video: https://youtu.be/MKFjGIrRKt4
on Basics of UV-Vis spectroscopy in Analytical Instrumentation
Link to the video: https://youtu.be/pxDbEkspXs0
on Filters and Monochromators, Gratings used in Analytical Instrumentation
Link to the video: https://youtu.be/YI17AmrR5Iw
on Detectors used in Analytical Instrumentation:
Link to the video: https://youtu.be/J8Bqyqjlqy0
on Single Beam Photometer used in Analytical Instrumentation
-------------------------------------------------------------------------------------------
Check our playlist on Digital Electronics:
https://www.youtube.com/playlist?list=PLsaRQCHmdZTBd8xnz_XqhHYdFGlnDapC4
Check our playlist on Analytical Instrumentation:
https://www.youtube.com/playlist?list=PLsaRQCHmdZTAuxG5X1G9W7zl_p3uwEmY0
-------------------------------------------------------------------------------------------
Follow us on:
----------------------------
Website http://practicalninjas.com/
Facebook https://www.facebook.com/practicalninjas/
Twitter https://twitter.com/practicalninjas
Instagram https://www.instagram.com/practicalninjas/
#plctutorials #ladderlogic #practicalninjas
Видео PLC Ladder programming #1 | Learn under 5 min | NO NC contacts | AND gate logic канала Practical Ninjas
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
PLC Ladder programming #2 | Learn under 5 min | NO NC contacts | OR & NOT gate logicPLC ladder Programming # 3 | Boolean logic | XOR gateWhat is Ladder Logic?Motor Control 101Concept of Sinking and Sourcing in PLC | Learn under 5 min | Steps towards learning Automation - 0311 - Motors Start with Interlock - Easy PLC Programming Tutorials for BeginnersWhat are the Most Popular PLC Programming Languages?What is the Difference Between PLC and DCS?Timer On and Off DelaysWhat are Basic logic gates? | Learn basic digital gates in 6 min | AND, OR and NOT gates | DE.10Lesson 1: What is PLC in Hindi? (NEW) / PLC Programming tutorial for beginners in HindiPLC Analog Inputs and SignalsEngineering - Relay Logic Circuits Part 1 (E.J. Daigle)Allen Bradley RSLogix 500 PLC Counters and TimersPLC PROGRAMMING LANGUAGE - LADDER LANGUAGE || FBD || STL || IN HINDI BY GOPAL SIR || P46What are the Differences between DCS and SCADA?Basic PLC Instructions (Full Lecture)How does a relay work? | Normally Open | Normally Closed | Steps towards learning Automation - 02Controlling Water Level in the PLC Ladder Logic Program