Odds & Ends 33: Some Odd Jobs and New Tools
A mixed bag of content including a couple of small jobs in the shop including some broaching, some lathe work and some mill work. Also show off a couple of new tools and such that have found their way into the shop over the past few weeks. Enjoy!
Mike Wiggins video on boring a "Farmall/ John DeereTractor Hub": https://youtu.be/1C71iZRVQAk
Video on "Starrett No. 120A Dial Calipers: Disassembly, Cleaning and Reassembly": https://youtu.be/p5cS6gPTgO8
Видео Odds & Ends 33: Some Odd Jobs and New Tools канала Keith Rucker - VintageMachinery.org
Mike Wiggins video on boring a "Farmall/ John DeereTractor Hub": https://youtu.be/1C71iZRVQAk
Video on "Starrett No. 120A Dial Calipers: Disassembly, Cleaning and Reassembly": https://youtu.be/p5cS6gPTgO8
Видео Odds & Ends 33: Some Odd Jobs and New Tools канала Keith Rucker - VintageMachinery.org
Показать
Комментарии отсутствуют
Информация о видео
16 ноября 2015 г. 16:55:52
00:46:03
Другие видео канала
![Odds & Ends 60: ArnFest Goodies](https://i.ytimg.com/vi/imXRIJ43xIA/default.jpg)
![Finding a Universal Head Drive Gear for my Kearney & Trecker 3H Horizontal Milling Machine!](https://i.ytimg.com/vi/vBYLREESki8/default.jpg)
![Wilton Vise Restoration Part 2: Painting, Reassembly and Making a New Handle](https://i.ytimg.com/vi/ZoTE-wycoSM/default.jpg)
![Dangerous Wood Sawmill Homemade Machine Working - EXTREME Equipment Biggest Chainsaw Wood Milling](https://i.ytimg.com/vi/vWhLVV6YYu0/default.jpg)
![Boring a Clutch Arm off of a 75 HP Case Steam Traction Engine with Brian Block](https://i.ytimg.com/vi/l5aeN-blckg/default.jpg)
![Making and Aluminum Way Cover - Part 2 Video: Machining the part on the Mill](https://i.ytimg.com/vi/JZl-wd9H5k8/default.jpg)
![Odds & Ends 30: Vise Repair, Planer Bolts, and Leather Fillet](https://i.ytimg.com/vi/6ca6fjZ62tQ/default.jpg)
![Wells-Index Mill: Repairing the Worm Gear that Tilts the Head](https://i.ytimg.com/vi/zqoUoVgd7fI/default.jpg)
![Repairing a Broken Gear Part 2: Milling a new Gear Tooth](https://i.ytimg.com/vi/RWUh-T60qOo/default.jpg)
![Turning a Pair of Gear Blanks for a Reed-Prentice Metal Lathe](https://i.ytimg.com/vi/jIMvty4PtqU/default.jpg)
![Odds & Ends 34: Moultrie Swap Meet Finds, Other New Tools](https://i.ytimg.com/vi/sp9JLgOW4rY/default.jpg)
![TOUR of tubalcain's Machine Shop mrpete222](https://i.ytimg.com/vi/qdHBGr79BJA/default.jpg)
![Installing and Setting New Knives in a Crescent Machine Co. Jointer](https://i.ytimg.com/vi/kQdiiT9Fy6o/default.jpg)
![Metal Planer Restoration 43: Machining a Cast Iron Gear Blank](https://i.ytimg.com/vi/a6sQ8imvcA4/default.jpg)
![Odds & Ends 40: Shop Update and New Tools](https://i.ytimg.com/vi/1D7R1tn_NXg/default.jpg)
![Vance Update: Knives, Outfeed Guides and Frabricating a Pulley Bracket](https://i.ytimg.com/vi/W11aU-5ODzw/default.jpg)
![Machining Dividing Head Index Plates: Drilling Hole Patterns](https://i.ytimg.com/vi/aMUNPqofCII/default.jpg)
![Odds & Ends 27: Bar Z Summer Bash, New Shop Update, and Viewer Mail](https://i.ytimg.com/vi/dToyLhAfs7w/default.jpg)
![Shop Tour 7: Anthoine Machine Shop, Fort Valley, GA](https://i.ytimg.com/vi/3_Q3zF7exbM/default.jpg)
![Frick Steam Engine Restoration - Fabricating & Machining an Axle Bracket](https://i.ytimg.com/vi/zbN1dT-FYKI/default.jpg)