Turning a Pair of Gear Blanks for a Reed-Prentice Metal Lathe
I am working on a project that a viewer asked me to help with - making a pair of gears for a Reed-Prentice Lathe. In this first part, we turn out the two gear blanks on the metal lathe.
Support VintageMachinery.org on Patreon:
https://www.patreon.com/vintagemachinery
Please Visit: http://www.vintagemachinery.org
Sponsored by:
American Rotary Phase Converters
https://www.americanrotary.com/?sld=krucker
Use checkout code "Vintage10" for a 10% discount on all AD, ADX and AI converters!
Видео Turning a Pair of Gear Blanks for a Reed-Prentice Metal Lathe канала Keith Rucker - VintageMachinery.org
Support VintageMachinery.org on Patreon:
https://www.patreon.com/vintagemachinery
Please Visit: http://www.vintagemachinery.org
Sponsored by:
American Rotary Phase Converters
https://www.americanrotary.com/?sld=krucker
Use checkout code "Vintage10" for a 10% discount on all AD, ADX and AI converters!
Видео Turning a Pair of Gear Blanks for a Reed-Prentice Metal Lathe канала Keith Rucker - VintageMachinery.org
Показать
Комментарии отсутствуют
Информация о видео
1 сентября 2017 г. 15:59:30
00:42:03
Другие видео канала
Steam Locomotive Connecting Rod Bearings - Fitting Up the Second Bearing and InstallationThompson Grinder Restoration: Hydraulic System and Finishing TouchesBrazing Cast Iron: Brazing a Broken Yoke CastingMonarch 612 Lathe Restoration: Machining a New Lever Handle Bushing with a Square Broached HoleCamelback Drill Press Gears 2: Cutting Gear Teeth on the First GearVulcan Steam Locomotive Spring Hangers - Machining the Details after ForgingSteam Locomotive Connecting Rod Bearings - Finishing up the Right Side Rod and BearingsDiresta Bandsaw Restoration 27: Finishing the Bottom Wheel and Installing the TableMonarch 612 Lathe Restoration: Minor Repairs and Painting the Lathe CarriageMonarch 612 Lathe Restoration: Rebuilding the CompoundHydraulic Press Restoration: Retrofitting a Table Lifting Winch to the PressBlacksmith Forge Blower: Machining a New Spur Gear from a Rough CastingHorizontal Boring Mill Restoration: Installing the Table Lead Screw and Tailstock BaseLucas Horizontal Boring Mill Restoration: Making a Morse Taper No. 5 Tailstock AdapterVulcan Steam Locomotive Connecting Rod Bearings: Gang Milling on the Horizontal Milling MachineMonarch 612 Lathe Restoration: The Tailstock Dilemma - Making One Good One from Two....Tally Ho Capstan Project: Contouring Milling & Finishing Up the Adapter FlangeBoring Steam Locomotive Connecting Rod Bronze Bearings to SizeMonarch 612 Lathe Restoration: Finishing up Details - Doors, Knobs, Jib Crane...Modifying a Stock Gear For a Metal Lathe RepairMonarch 612 Lathe Restoration: Adapting a Rack and Pinion Crank to Move the Tailstock