Creating and flying a waypoint "mission", E.T. Vector Waypoint Navigation
I've had a few requests to make this video, so here goes! ;) A quick rundown of creating a flight plan of sorts with the Eagle Tree Vector, then flying the mission. Of course you can do a lot more than the simple setup I did here, but this should give you a pretty good idea of what to expect. Hope you enjoy it, and be sure to like and subscribe and all that. ;)
Latest firmware and revisions history for the Vector (and Micro Vector) - http://www.eagletreesystems.com/index.php?route=information/information&information_id=16
Eagle Tree's updated waypoints manual can be found here, and covers a lot more detail than I will ever have time to get to in any video, including multirotor-specific options that do not apply to fixed wing - http://eagletreesystems.com/Manuals/waypoints.pdf
__
Patreon: https://www.patreon.com/bonafidepirate
You can help to support my channel by using the affiliate links below when making a purchase:
Banggood - http://bit.ly/piratebgood
eBay - http://ebay.to/2r7k3mb
Amazon - https://www.amazon.com/shop/bonafidepirate
Foxeer - http://www.foxeer.com/?u=499
You can also make a donation if you wish to do so at the following link:
Support my channel and my efforts to bring you better content, every little bit helps! http://paypal.me/keithluneau
Here's some affiliate links to the video gear I use from Ready Made R/C:
1.3GHz video transmitters (I use 200, 400, 800, and 1500mW on various planes) https://goo.gl/Mhq6TW
I recommend this receiver to go with them. I use an older Racewood type they used to sell, but these are supposed to be at least as good with the same Comtech tuners in them. Apparently Racewood is no longer in business, so here's what replaced them: https://goo.gl/xC2RLx
I use this 8dbi Patch Antenna, it has been my go-to antenna for a long time now, for years! lol I've been out more then 10 miles using one of these and the 800mW vtx listed above: https://goo.gl/hGmcNS
On the transmitter side, the stock dipoles that come with them work pretty good together with that patch, but if you want slightly better performance and less weight/drag, consider these: https://goo.gl/CPuFGf
Видео Creating and flying a waypoint "mission", E.T. Vector Waypoint Navigation канала bonafidepirate
Latest firmware and revisions history for the Vector (and Micro Vector) - http://www.eagletreesystems.com/index.php?route=information/information&information_id=16
Eagle Tree's updated waypoints manual can be found here, and covers a lot more detail than I will ever have time to get to in any video, including multirotor-specific options that do not apply to fixed wing - http://eagletreesystems.com/Manuals/waypoints.pdf
__
Patreon: https://www.patreon.com/bonafidepirate
You can help to support my channel by using the affiliate links below when making a purchase:
Banggood - http://bit.ly/piratebgood
eBay - http://ebay.to/2r7k3mb
Amazon - https://www.amazon.com/shop/bonafidepirate
Foxeer - http://www.foxeer.com/?u=499
You can also make a donation if you wish to do so at the following link:
Support my channel and my efforts to bring you better content, every little bit helps! http://paypal.me/keithluneau
Here's some affiliate links to the video gear I use from Ready Made R/C:
1.3GHz video transmitters (I use 200, 400, 800, and 1500mW on various planes) https://goo.gl/Mhq6TW
I recommend this receiver to go with them. I use an older Racewood type they used to sell, but these are supposed to be at least as good with the same Comtech tuners in them. Apparently Racewood is no longer in business, so here's what replaced them: https://goo.gl/xC2RLx
I use this 8dbi Patch Antenna, it has been my go-to antenna for a long time now, for years! lol I've been out more then 10 miles using one of these and the 800mW vtx listed above: https://goo.gl/hGmcNS
On the transmitter side, the stock dipoles that come with them work pretty good together with that patch, but if you want slightly better performance and less weight/drag, consider these: https://goo.gl/CPuFGf
Видео Creating and flying a waypoint "mission", E.T. Vector Waypoint Navigation канала bonafidepirate
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Eagle Tree Antenna Tracker Tutorial - RCGroups FPV Video ReviewEagleTree Vector: Unboxing & Introduction - Part #1 (for Fixed/ Flying Wings)Mini Talon, ET Vector Waypoint NavigationFirst Look at the EagleTree Vector & Why I went for the Vector over the Pixhawk PX4Vector OSD in DJI FPV Goggles!Skyhunter FPVFPV full electronics setup with Eagletree Vector and DragonLink (XUAV Clouds)Flite Test | Vector Flight Controller + OSD - Basic Setup(5/5) EagleTree Vector Series: The Safety/Nav Setup Tab (Failsafe/RTH/Loiter)First Look At the Eagle Tree Mini Vector or Micro VectorVector FPV Controller with Full Color OSD on a FunjetEagletree Vector Telemetry to Taranis over Dragonlink v3 Part 2 of 3Eagletree Vector EzUHF SPPM Config with RSSI & LQ SetupEsky Eagle FPV 4/3/22🔴Setting up a Eagle Tree Vector for the Harrier FPV WingReptile Dragon II FPVSuper Fun AR Pro FPV FlightArduplane 4.2.0dev AutotuneEagletree Eagle Eyes Antenna Tracker and Scratch Built Ground Station - 1.3ghz Video 5.8ghz Relay